Liquid phosphorus removal agent

Description :

Liquid phosphorus removal agent is a new, high-quality, and efficient inorganic polymer flocculant based on iron salts; Has excellent coagulation performance, dense alum flowers, and fast settling speed; Excellent water purification effect, good water quality, free of harmful substances such as aluminum, chlorine, and heavy metal ions, as well as iron ions. The water phase is non-toxic, harmless, safe, and reliable; The effects of turbidity removal, decolorization, oil removal, dehydration, sterilization, deodorization, algae removal, removal of COD, BOD and heavy metal ions in water are significant.

[Chinese name]: Liquid polyiron, phosphorus removal agent;

[English name]: Liquid polymeric ferric sulfate, abbreviated as LPFS;

[Appearance]: LiquidPhosphorus removal agentThe appearance is a reddish brown liquid;

【 Quality Standard 】: GB14591-2006.

Main features:

1. LiquidPhosphorus removal agentIt is a new, high-quality, and efficient inorganic polymer flocculant based on iron salts;

2. Excellent coagulation performance, dense alum flowers, and fast settling speed;

3. Excellent water purification effect, good water quality, free of harmful substances such as aluminum, chlorine, and heavy metal ions, and no water phase transfer of iron ions, non-toxic, harmless, safe and reliable;

4. It has significant effects on turbidity removal, decolorization, oil removal, dehydration, sterilization, deodorization, algae removal, removal of COD, BOD and heavy metal ions in water;

5. Adapt to a wide pH range of 4-11 for water bodies, with a preferred pH range of 6-9. The pH value and total alkalinity of the purified raw water change little, and the corrosiveness to treatment equipment is low;

6. It has a significant purification effect on slightly polluted, algae containing, low-temperature and low turbidity raw water, and is particularly effective in purifying high turbidity raw water;

7. The dosage is small, the cost is low, and the processing cost can be saved by 20% -50%.

[Scope of Application]:

liquidPhosphorus removal agentWidely used for the purification and treatment of urban drinking water and industrial circulating water, as well as for the purification and sludge dewatering of industrial wastewater and urban domestic sewage in industries such as chemical, petroleum, mining, papermaking, printing and dyeing, brewing, steel, coal gasification, painting, leather, pharmaceuticals, food, electroplating, etc.

【 Instructions 】:

1. The optimal dosage of liquid can be determined based on the turbidity of the raw water. Generally, for turbid water (with a turbidity of 100-500mg/L), 30-50 kilograms are used per thousand tons. For non drinking water with high turbidity industrial wastewater, an appropriate dosage can be added.

2. When treating industrial wastewater, dilute the liquid to 1-2 times the volume of the aqueous solution. When the concentration of the source water is high and the amount of treated water is large, it can be directly added. Then, based on the results of laboratory simulation experiments, the optimal process conditions and dosage are added. After thorough stirring, coagulation and sedimentation, clear effluent can be obtained.

3. The water treatment plant can also dilute it 2-5 times before adding it. The determination of the dosage can be determined based on the properties of the raw water through production debugging or beaker experiments to determine the appropriate amount of alum formation. The water treatment plant can use the original dosage of other chemicals as a reference. Under the same conditions, the dosage of this product is roughly equivalent to that of solid polyaluminum chloride, which is 1/2-1/3 of the dosage of solid aluminum sulfate. If the original liquid product is used, it can be calculated and determined based on the corresponding concentration of the drug, roughly according to a weight ratio of 1:3.

[Packaging and Storage]:

The product is packaged in tank trucks for transportation or 25Kg/1000Kg polyethylene plastic drums.

Effective storage period of the product: six months for liquids.

Different manufacturers or brands of water treatment agents cannot be mixed and must not be stored together with other chemicals. Liquid polymeric ferric sulfate solution and diluent are slightly corrosive, and protective measures should be taken during use.

AfterSalesService :