screw conveyor

Description :

1. Spiral conveyor, commonly known as auger conveyor, is a widely used conveying equipment in mineral, feed, grain and oil, sludge, coal slurry, kitchen waste, fertilizer, chemical raw materials, and construction industries. It relies on spiral blades to transport materials from one end to the other.

2. GL tubular screw conveyor is a continuous conveying equipment that uses spiral rotation to push materials, suitable for conveying materials such as flour, grains, cement, fertilizers, ash, sand, stones, coal powder, small pieces of coal, etc. Due to the small effective circulation area inside the body, screw conveyors are not suitable for conveying materials that are prone to spoilage, have high viscosity, and are prone to clumping. The tubular screw conveyor can be arranged in a horizontal or inclined manner. If the tubular screw conveyor needs to change direction for conveying, special orders should be made.

3. The new spiral conveyor has a novel and reasonable structure, advanced technical indicators, good sealing performance, and strong applicability. The whole machine has low noise, easy operation and maintenance, and flexible layout of inlet and outlet positions. Widely used in building materials, electricity, chemical industry, metallurgy, coal

Charcoal, aluminum magnesium, machinery, light industry, grain and food industries; Suitable for horizontal or less than 20 degrees. Tilt angle, send materials that are prone to spoilage, have high viscosity, and are prone to clumping. The diameter of the new screw conveyor ranges from 100mm-10

0.5m level.

4. Shaftless screw conveyor

U-shaped section: The external structural dimensions are basically the same as those of the LS series screw conveyor

Axial free spiral: The spiral body is a thick strip spiral without a spiral shaft, and the head is connected to the drive shaft. The structure is divided into single and double blade types, and the material is divided into carbon steel and stainless steel. There are two types according to the pitch ratio: 1:1 and 2:3

Sliding village board: shaftless spiral body in the middle, tail working support, material divided into three categories: high-strength engineering plastic, stainless steel, and other high wear-resistant materials

WLSY shaftless screw conveyor

Work appearance: It is basically the same as the WLS type working parts, absorbing the excellent and mature technology of LSY series screw conveyor, and has the structural characteristics of WLS type group screw conveyor.

Circular tube casing: With good sealing performance, it can reach the airtightness level (0.02mpa) and can work under positive and negative pressure conditions. 2、 Scope of use: WLS shaftless screw conveyor

Ordinary models have unique advantages in conveying winding materials (such as household waste) and fiber materials (such as sawdust and wood chips).

Heat resistant models: conveying hot and high-temperature materials without tail support. Such as high-temperature dust recovery in blast furnaces and transportation of high-temperature furnace ash (slag). WLSY shaftless screw conveyor

Ordinary model: Conveys highly adhesive, paste like viscous materials. Such as sludge in sewage, high moisture content slag, etc. Explosion proof machine type: transportation of flammable and explosive materials.

AfterSalesService :