High flow lift jet fire truck, specifically designed for high-altitude firefighting and rescue in Hubei Jiulong Special Automobile

Description :

  A high-altitude jet fire truck is a special firefighting vehicle that integrates walking, lifting, and firefighting functions. It is mainly used to extinguish high-rise buildings, large warehouses, petrochemical plants, and other high-rise or large-scale fires. This model is carried by the chassis, and uses the hydraulic system to drive the boom to extend, lifting the fire water monitor or foam monitor to the high altitude, realizing the long-distance and large flow accurate fire fighting operation, effectively solving the problem that the traditional ground fire-fighting equipment cannot reach the high-rise fire point, and it is the key equipment in the modern urban fire prevention and rescue system.

  The high-rise jet fire truck usually uses high-strength steel to manufacture the boom structure, with multi section folding or telescopic design. The common working height range is 30 meters to 50 meters or more, depending on the chassis load-bearing capacity and boom structure. The whole vehicle is equipped with a high-performance hydraulic pump station, which supports stable luffing, slewing and telescoping movements. The end is integrated with a large flow fire monitor, and supports switching between DC and spray multiple jet modes. The vehicle complies with national mandatory standards such as GB 7956.1 "Fire Trucks Part 1: General Technical Conditions", and key hydraulic components and electrical control systems have undergone strict pressure testing and reliability verification to ensure stable operation under extreme working conditions.

  When selecting a high-altitude jet fire truck, it is important to consider the building height, road traffic conditions, and water supply capacity of the operating site. For high-rise residential areas or commercial centers, it is recommended to choose vehicles with a working height of over 40 meters; For flammable and explosive places such as petrochemical parks, the injection monitors and explosion-proof electrical systems with foam mixing function shall be preferentially selected. Please note that this vehicle model has high requirements for the flatness and bearing capacity of the working ground, and is not suitable for soft or uncured ground environments. Compared with aerial ladder fire trucks, high-altitude jet trucks are more focused on high flow firefighting rather than personnel rescue, and procurement needs to be differentiated based on the main rescue tasks.

  The daily maintenance of high-altitude jet fire trucks is crucial, and it is necessary to regularly check the hydraulic oil level, oil pipe sealing, and arm welding status to prevent oil leakage or structural fatigue. After each police call, the water system must be thoroughly flushed to prevent impurities from blocking the nozzle or corroding the pump body. Before operation, it should be confirmed that the support legs are fully extended and locked, ensuring that the vehicle's levelness is within the allowable range. It is strictly prohibited to carry out high-altitude operations in wind speeds exceeding level 6 or thunderstorm weather. Common faults include insufficient hydraulic system pressure, interference with electronic control signals, etc. It is recommended to establish regular professional maintenance records and have certified personnel conduct in-depth inspections to ensure that the vehicle is always in a state of readiness.

Our company currently has 18 meter high lift jet fire trucks, 25 meter high lift jet fire trucks, 20 meter high lift jet fire trucks, and 32 meter high lift jet fire trucks. Factory direct sales: 152 * 7131 * 1788

AfterSalesService :