Wholesale of modular steel platform

Description :

　　Layout of platform structure

　　1. Meet the requirements of process production operations and ensure clearance for passage and operation. The general clear height for passage should not be less than 1.8m, and protective railings should generally be installed around the platform, with a height of 1M. When the platform height is greater than 2M, a skirting board with a height of 100-150mm should also be installed under the protective railing. The platform should be equipped with a ladder for up and down passage, and the width of the ladder should not be less than 600mm.

　　2. When determining the plan size, elevation, beam grid, and column grid layout of the platform structure, in addition to meeting the usage requirements, the layout of beams and columns should also consider the location of equipment loads and other large concentrated loads on the platform, as well as the hanging of large-diameter industrial pipelines;

　　3. The layout of the platform structure should strive for economic rationality and clear transmission of power. The arrangement of the beam grid should be adapted to its span. When the span of the beam is large, its spacing should also be increased. Fully utilize the allowable span of the pavement and arrange the beam grid reasonably to achieve better economic results.

　　Characteristics of Steel Platform Structure

　　1. The steel platform produced by the shelving factory is assembled as a whole without the need for on-site welding. It is usually composed of beams, columns, plates, and other components made of steel sections and plates, and connected by screws or rivets between each part. This steel platform has fast construction, moderate cost, easy installation and disassembly, and can be reused in a new location. Its structure is novel and beautiful.

　　2. The structure of steel platform shelves mainly consists of main beams, columns, floor slabs, railings, and stairs; The overall structure adopts a modular design, without the need for on-site welding. The floor bearing capacity of a typical steel platform can reach 200kg~1000kg/square meter.

　　3. The supporting columns of the steel platform are made of pipes with strong bearing capacity and low steel consumption. The main beam is made of H-beam or I-beam, and the secondary beam is made of buckle crossbeam produced by Korisen Storage Shelf Factory. This type of crossbeam has the advantages of strong bearing capacity, light structure, and low cost.

　　4. The floor planks are made of cold-formed patterned steel plates or hollow boards produced by Korisen Storage Shelf Factory. The planks are connected by a buckle plate structure, which is rigidly fixed to the main and secondary beams. The overall structure of the platform is strong, and different floor panels can be selected according to the actual use of the customer to meet the requirements of fire protection, dust prevention, and small item falling prevention.

　　5. The steel platform can be equipped with elevators and lifting platforms for easy loading and unloading of goods. Goods are transported to the second and third floors by forklifts or lifting platforms, and then transported to the designated location by small cars or pallet trucks. Warehouse management personnel operate it easily, quickly, and efficiently.

　　6. All materials are carbon structural steel, and the surface is treated with shot blasting, phosphating, and spray coating for corrosion resistance. It has superior load-bearing performance, simple and elegant appearance, and can meet the storage needs of various industries and large items or whole pallets of goods.

　　Advantages of attic steel structure

　　The architectural style is flexible and rich. Large open room design, indoor space can be divided into multiple schemes to meet the different needs of users, and the area utilization rate can be improved by reducing the cross-sectional area of columns and using lightweight wall panels,

　　Good energy-saving effect, the wall adopts lightweight energy-saving standardized prefabricated wall panels instead of clay bricks, with good insulation performance and energy saving of --%,

　　The use of steel structure systems in residential buildings can fully utilize the good ductility, strong plastic deformation capacity, and excellent seismic and wind resistance performance of steel structures. The steel reinforced concrete column fully and reasonably utilizes the material properties of steel and concrete, and reduces the section by increasing the corresponding strength. Its compressive and lateral bending strength are higher than that of concrete columns -This greatly increases the ability to resist strong earthquakes and improves the safety and reliability of residential buildings. Especially in the event of earthquakes or typhoons, it can prevent the collapse and damage of buildings.

　　The total weight of the building is light, and the steel structure residential system uses various lightweight materials to form high-strength, fireproof, waterproof, heat-insulating, soundproof, and energy-saving composite walls, replacing traditional clay bricks and other bulky masonry materials.

　　The construction speed is fast, and the steel structure adopts a lightweight building steel structure system, which does not require on-site binding of steel bars or the production of templates. When pouring concrete into the floor slab, there is no need for temporary support, which can greatly accelerate the assembly speed on the construction site. Therefore, the construction period of lightweight building steel structure system can greatly shorten the occupation period of investment funds and improve the efficiency of fund utilization.

　　Good environmental protection effect.

　　The process of building the attic platform

　　Construction process:

　　Construction site investigation - raw material procurement, inspection, and entry into the construction site - rust removal - cutting - re inspection of embedded parts - steel column hoisting - inspection and correction - welding - steel beam hoisting - inspection and correction - welding - support system installation - inspection and correction - welding - spraying anti rust paint - preliminary inspection of the main body - acceptance of Suzhou attic steel structure steel platform and steel structure staircase construction

AfterSalesService :

• Wholesale of modular steel platform