Installation of Combined Steel Platform Picture

Description :

　　Steel platform columns are generally designed as axial compression members. The aspect ratio of the column should not exceed 150, and the overall length can be assumed to be between 80-120. The upper and lower ends of the column are generally designed as hinged joints. For platform columns that bear large loads, the upper end should be designed as hinged joints and the lower end as rigid joints. The thickness of the column base plate is determined by calculating the bending moment generated by the back pressure of the column foundation on the base plate, but it should not be less than the small thickness of the column limb and 10mm. For workshops with obvious corrosion, it should be appropriately thickened. The stability of independent steel platform structures is generally ensured by the support between columns. The support should be arranged in the middle of the column.

　　Layout of platform structure

　　1. Meet the requirements of process production operations and ensure clearance for passage and operation. The general clear height for passage should not be less than 1.8m, and protective railings should generally be installed around the platform, with a height of 1M. When the platform height is greater than 2M, a skirting board with a height of 100-150mm should also be installed under the protective railing. The platform should be equipped with a ladder for up and down passage, and the width of the ladder should not be less than 600mm.

　　2. When determining the plan size, elevation, beam grid, and column grid layout of the platform structure, in addition to meeting the usage requirements, the layout of beams and columns should also consider the location of equipment loads and other large concentrated loads on the platform, as well as the hanging of large-diameter industrial pipelines;

　　3. The layout of the platform structure should strive for economic rationality and clear transmission of power. The arrangement of the beam grid should be adapted to its span. When the span of the beam is large, its spacing should also be increased. Fully utilize the allowable span of the pavement and arrange the beam grid reasonably to achieve better economic results.

　　Steel structure platform, steel structure concrete platform, scope of use: attic mezzanine, indoor mezzanine, cargo steel platform, attic construction, steel structure, second floor platform, steel structure frame, concrete cast-in-place mezzanine floor slab. For example, workshops, warehouses, basements, villas, homes, schools, hotels, clubs, shops, restaurants, teahouses, pharmacies, LOFT indoor high rise spaces can be used for mezzanine renovation, structural renovation, and additional floors. All materials used are national standard steel. There are multiple construction sites available for visitors in the surrounding areas of Beijing. Years of production experience, precise technical exploration, quality!

　　1. Design and construction of partition steel structure platform, equipment and cargo platform for indoor workshop and warehouse

　　2. Raise the facade of high-rise buildings and jump floors; Bottom commercial layer, steel structure layer

　　3. Production of steel structure partitions and villa steel structure attic;

　　4. Old house renovation civil engineering and steel structure addition design;

　　5. Design and installation of steel structure stairs and steel frame stairs;

　　6. And processing and manufacturing of special-shaped steel structures, planting of steel bars, chemical anchor bolts, steel bonding reinforcement, carbon fiber reinforcement, various steel structure staircases, various warehouse steel structure interlayers, various newly built steel structures, insufficient reinforcement of various beams, slabs, walls, columns, and various building steel structure renovation and reinforcement construction;

　　Steel structure partitions and interlayers belong to the secondary structure production, construction, and installation. Steel structure mezzanine is commonly used in ground level commercial buildings, households, and warehouses. The quality of steel structure partitions and mezzanine buildings is equivalent to the quality of the building for a certain number of years!

　　A composite steel platform is a design combination that utilizes space in multiple layers or more. In the case of limited floor area in a factory building, it can be planned in a three-dimensional manner, effectively making full use of the space.

　　Simply put, it is to use steel beams and metal plates to divide the original storage area into floor partitions, making the warehouse space most effectively utilized. The entire platform adopts a modular design, which does not require hot welding on site. The assembly process is safe and fast, and all components have undergone strict surface treatment, making them beautiful and durable. It is an ideal solution for expanding the upper space of warehouses and factories.

AfterSalesService :

• Installation of Combined Steel Platform Picture