Warehouse cantilever shelving equipment and its role in improving storage efficiency

Description :

　　Characteristics of cantilever shelves:

　　1. Cantilever shelves are only suitable for storing goods in long strips or rolls;

　　2. Cantilever shelves need to be equipped with handling equipment with wider fork spacing, such as side forklifts with larger fork spacing;

　　3. The height of cantilever shelves is limited, generally below 6m;

　　4. The space utilization rate of cantilever shelves is low, about 35% -50%;

　　5. Cantilever shelf storage types: long strips and long rolls.

　　Cantilever shelving is an important type of shelving. Cantilever shelves are suitable for storing long materials, circular materials, boards, pipes, and irregular goods. Cantilever shelves can be single-sided or double-sided, and they have the characteristics of structural stability, good load-bearing capacity, and high space utilization. Cantilever shelving columns are often made of H-shaped steel or cold-rolled steel. Cantilevers are made of square tubes, cold-rolled steel or H-shaped steel, and the connection between the cantilever and the column is plug-in or bolted. The connection between the base and the column is bolted, and the base is made of cold-rolled steel or H-shaped steel.

　　Cantilever storage shelves are an important type of shelf. Cantilever shelves are suitable for storing long materials, circular materials, boards, pipes, and irregular goods. Cantilever shelves can be single-sided or double-sided, and they have the characteristics of structural stability, good load-bearing capacity, and high space utilization.

　　Cantilever shelves are generally made of two materials:

　　1. Using square tube production: Cantilever shelves are made by selecting square tubes that meet the corresponding cantilever layer load requirements, cutting them into the required size, welding anti slip protective plates on one end, and welding U-shaped column connectors on the other end;

　　2. Made of C-shaped steel: Based on the corresponding cantilever layer load requirements, the specifications of the C-shaped steel are first selected for the cantilever rack. After selection, two pieces of C-shaped steel are welded together. After welding, an anti slip protective plate is welded on one end, and a U-shaped column connector is welded on the other end.

AfterSalesService :

• Warehouse cantilever shelving equipment and its function