Cement mortar anti-corrosion steel pipe for sewage treatment, cement mortar lining steel pipe manufacturer quotation

Description :

　　Cement mortar anti-corrosion steel pipes can be used in municipal engineering: suitable for high-rise building water supply, heating network, water engineering, gas transmission, buried water transmission and other pipelines. Petroleum: Process pipelines used for transporting corrosive media in industries such as petroleum transportation pipelines, chemical pharmaceuticals, and printing and dyeing. Sewage treatment: Sewage treatment discharge pipes, sewage pipes, and biological pool anti-corrosion engineering. Agriculture: agricultural irrigation pipes, deep well pipes, drainage pipes, and other networks have better corrosion resistance than steel structures, which is beneficial for the fire resistance and prevention of steel pipes.

　　Grade 100 cement mortar refers to a strength of 100kg/cm2, but all are now measured in MPa, with Grade 100 corresponding to M10. The mix proportion varies depending on the different raw materials and mortar uses. Taking the commonly used 42.5 ordinary Portland cement and medium sand mixed with 100 (M10) masonry mortar as an example: cement 305kg: sand 1.10m3: water 183kg. Mortar grades include M3, M5, M7.5, M10, M12.5, M15, M20, M25, M30, M40. Mortar is divided into several types according to its use, including masonry, plastering, and jointing, regardless of its grade. After the completion of cement mortar work, there is an important process, which is air drying. It refers to drying in the wind for 2-3 days in a natural state. Mainly to prevent cracks in cement mortar caused by bumps during shipment.

　　Cement mortar internal anti-corrosion pipeline: A mixture of cement, sand, and water is called cement mortar. The commonly referred 1:3 cement mortar is a mixture of 1 part cement and 3 parts sand, which actually ignores the composition of water. It is generally in a ratio of around 0.6, which should be used as a 0.6:1:3 cement mortar. In construction projects, it is used as a binder for block masonry materials such as rubble and red bricks; The second is used for indoor and outdoor plastering. When using cement mortar, additives such as micro foaming agents and waterproof powders should be frequently added to improve its workability and viscosity. Adding stones in proportion to cement mortar becomes concrete. The strength of cement mortar grade refers to a value in the overall distribution of compressive strength measured by standard testing methods for cubic specimens made and cured according to standard methods at 28 days of age.

　　Due to the concrete filling inside the steel pipe, it can absorb a large amount of heat energy. Therefore, the distribution of temperature field in the cross-section of the pipe column during a fire is very uneven, which increases the fire resistance time of the column, slows down the heating rate of the steel column, and once the steel column yields, the concrete can bear most of the axial load, preventing structural collapse. The fire resistance of composite beams will also be improved, as the temperature of the steel beams will be reduced by transferring heat from the top flange to the concrete. Experimental statistical data shows that meeting the requirement of a first level fire resistance of 3 hours can save 1/3 to 2/3 or even more fireproof coatings compared to steel columns. As the diameter of the steel pipe increases, more coatings are saved. High bearing capacity, good ductility, and superior seismic performance. Anti corrosion steel pipes are used in municipal engineering, including high-rise building water supply, heating network, water engineering, gas transmission, buried water transmission, and other pipelines. Petroleum: Process pipelines used for transporting corrosive media in industries such as petroleum transportation pipelines, chemical pharmaceuticals, and printing and dyeing.

AfterSalesService :

• Cement mortar anti-corrosion steel pipe