Burnt geotextile, heat cured polyester filament geotextile, asphalt road reinforced geotextile

Description :

　　Burnt geotextile generally refers to the surface heat treatment of ordinary long filament geotextile to increase its strength. The surface fibers of burnt geotextile are curled by hot soup, and the strength of burnt geotextile is generally higher than that of ordinary geotextile.

　　Characteristics of Burnt Geotextile:

　　(1) Widely used in the reinforcement of asphalt pavement, cement concrete pavement, and roadbed. Both hard and flexible road surfaces are applicable, which can reduce costs, extend service life, and prevent road reflection cracks compared to traditional road surfaces.

　　(2) The product has a suitable thickness and is easy to bond with asphalt pavement. After bonding with the adhesive layer oil, it forms an isolation layer and has waterproof and insulation effects. It has the ability to resist UV rays, cold, chemical corrosion, and biological damage.

　　(3) Lightweight and high-strength. The surface is rough and not easy to slide. When laying, the rough side of the surface after special treatment should face upwards to increase the friction coefficient and enhance the bonding force of the surface layer, preventing it from being rolled up or damaged by the wheels during construction. At the same time, it can also suppress the slipping phenomenon of vehicles and pavers on the fabric.

　　(4) Easy to construct and effective in application. The fiber filaments of general geotextiles are easily lifted by vehicle tires, causing them to hang, and in severe cases, they may even be rolled up, resulting in displacement and structural damage to the geotextile

AfterSalesService :

• Burnt filament geotextile