Steel plastic geogrid roadbed anti settlement GSZ steel plastic composite geogrid
Category:
building materials/Geosynthetic materials/Geogrid
Model:
moist and glossy
Brand:
moist and glossy
model:
moist and glossy
type:
Bidirectional tensile geogrid
material:
steel-plastic
tensile strength:
fifty thousand
Yield elongation:
three
purpose:
Reinforcement of roadbed to prevent settlement
width:
six
grid size:
one hundred and twenty-five
manufacturer:
Shandong Yingrun
Retail Price
4.00USD
重量
kg
- Product Description
-
model moist and glossy
type Bidirectional tensile geogrid
material steel-plastic
tensile strength fifty thousand
Yield elongation three
purpose Reinforcement of roadbed to prevent settlement
width six
grid size one hundred and twenty-five
manufacturer Shandong Yingrun
Description :
feature
1. The tensile force of the steel plastic composite grid is borne by high-strength steel wires woven in warp and weft directions, which produce extremely high tensile modulus under low strain capacity. The longitudinal and transverse ribs work together to fully utilize the interlocking effect of the grid on the soil.
2. The steel wires of the longitudinal and transverse ribs of the steel plastic composite grating are woven into a mesh, and the outer wrapping layer is formed in one go. The steel wires and the outer wrapping layer can coordinate with each other, and the elongation at break is very low (not greater than 3%). The main load-bearing element of steel plastic composite geogrid is steel wire, with extremely low creep deformation.
3. By processing the plastic surface during the production process, rough patterns are pressed to enhance the roughness of the grid surface and improve the friction coefficient between the steel plastic composite geogrid and the soil. 4. The width of the steel plastic composite grille can reach 6m, achieving efficient and economical reinforcement effect.
5. The high-density polyethylene used in the steel plastic composite grille ensures that it will not be corroded by acid, alkali, salt solutions, or oils at room temperature; Will not be affected by water dissolution or microbial invasion. Meanwhile, the high molecular weight properties of polyethylene are also sufficient to resist aging caused by ultraviolet radiation. After the grid is subjected to force, the longitudinal and transverse ribs work together without causing tearing or damage to the nodes. In actual engineering, after the compaction of the filling material, it is not affected by ultraviolet light and oxygen erosion, so it can fully meet the requirements of sexual engineering construction.
Engineering application areas: Soft soil foundation reinforcement, retaining walls, and pavement crack resistance engineering for highways, railways, bridge piers, approach roads, docks, dams, slag yards, and other fields.
AfterSalesService :
Key words:- Steel plastic geogrid
More Products
