Shandong Anti Crack Adhesive Manufacturer Anti Crack Adhesive Factory Direct Sales

Description :

　　Notes:

　　⑴ Before construction, the cement concrete pavement must be dry. Construction shall not be carried out on damp substrates or in rainy or snowy weather.

　　After construction, it is necessary to use sandbags or rubber tire rollers to compact the "crack prevention sticker" to prevent rainwater from entering the bonding surface of the "crack prevention sticker" before laying asphalt concrete. If it is expected to rain heavily before paving asphalt concrete, sealant should be used to seal both sides of the "crack prevention patch".

　　Construction should not be carried out when the temperature is below 5 ℃.

　　During the paving of asphalt concrete, vehicles are not allowed to roll or turn around on the "crack prevention sticker" on site.

　　When the slope is greater than 5%, the width of the "crack prevention sticker" should not exceed 330mm. When laying the bottom layer of asphalt concrete, there may be a small amount of slippage, which should be repaired in a timely manner to avoid affecting the quality of the project.

　　The total thickness of asphalt concrete paving should not be less than 150px.

　　When the height difference between adjacent edges of the "crack prevention sticker" is greater than 25px or there are many potholes, the part should be leveled before tiling to prevent the "crack prevention sticker" placed in the depression from being damaged by gravity. The leveling material can be epoxy mortar or asphalt mixture.

AfterSalesService :

• Shandong anti cracking sticker manufacturer