30KN Fiberglass Geogrid 80KN Fiberglass Grid Yingrun Manufacturer Wholesale
Category:
building materials/Geosynthetic materials/Geogrid
Model:
30KN80KN
Brand:
moist and glossy
model:
30KN80KN
type:
Bidirectional tensile geogrid
material:
fiberglass
tensile strength:
three hundred thousand
Yield elongation:
three
purpose:
Asphalt pavement reinforcement and crack prevention
width:
six
grid size:
twenty-five point four
manufacturer:
moist and glossy
Retail Price
1.70USD
重量
kg
- Product Description
-
model 30KN80KN
type Bidirectional tensile geogrid
material fiberglass
tensile strength three hundred thousand
Yield elongation three
purpose Asphalt pavement reinforcement and crack prevention
width six
grid size twenty-five point four
manufacturer moist and glossy
Description :
Naming and model representation of fiberglass geogrid:
Common names include fiberglass grid, fiberglass geogrid, and warp knitted fiberglass geogrid.
（GB/T 21825—two thousand and eight）Medium fiberglass geogridModel representation:
EGA Vertical mesh size x horizontal mesh size（Longitudinal tensile strength multiplied by transverse tensile strength-Width,The classification of plastic geogrids is divided according to the direction of force: (1) Unidirectional tensile geogrids. Unidirectional geogrids have high strength and tensile modulus in the tensile direction and are a relatively reinforced material. Due to the fact that unidirectional geogrids can only be stretched axially during molding, they can only be subjected to axial force. Its engineering performance is as follows: enhancing the roadbed, effectively distributing loads, enhancing soil stress performance, roadbed performance and bearing capacity, and service life; Constrain the lateral deformation of the roadbed and the overall or local deformation caused by the loss of roadbed materials, uneven settlement, and effectively prevent the fracture of the road body; Suitable for reinforced retaining walls, with wallability; Improve the self-supporting capacity of the backfill behind the retaining wall, increase the soil pressure of the retaining wall, save costs, extend its service life, and reduce maintenance costs; Can withstand greater alternating loads; Prevent roadbed deformation, cracking, etc. caused by the loss of roadbed materials. (2) Bidirectional tensile geogrid has high tensile strength in both longitudinal and transverse directions. According to the strength requirements, manufacturers can produce more flexible biaxial tensile geogrids, which can withstand forces in both directions compared to unidirectional geogrids. When used for reinforcement, it can evenly distribute force in all directions, resulting in better overall performance.
AfterSalesService :
Key words:- 30KN fiberglass geogrid
More Products
