3.0mm Thick Road Crack Adhesive Tape Shandong Yingrun Production Processing Customization

Description :

　　The new type of pavement crack sealing tape is a self-adhesive pavement sealing tape with independent property rights developed by Yingrun Engineering Materials Company. The material is asphalt based and has good wear resistance, strong water sealing, low cost, and high elasticity. It can be freely turned and pasted according to the direction of cracks, and has the advantages of simple construction. To ensure the sealing effect, the main design indicators of the new type of adhesive tape developed by our company are its adhesion and compatibility with asphalt pavement. After one month of vehicle driving, the adhesive tape will gradually deform and autonomously squeeze into the cracks, sealing the cracks without water leakage. At the same time, due to its strong compatibility with asphalt, it integrates better with asphalt pavement without jumping off the vehicle. During winter snow removal, the snow shovel will not damage the adhesive tape.

　　Non tire adhesive tape is SBS thermoplastic elastomer modified asphalt, based on polyester felt as the tire base, made by mixing and grinding fine sand, mineral particles, etc. The adhesive tape is made of asphalt as the raw material, just like non tire adhesive tape.

　　There is a difference in appearance between non tire adhesive tape and ordinary adhesive tape. Ordinary adhesive tape is the same as crack resistant tape, only with a different width. And the tire free adhesive seam has a curved feeling. The difference can be seen at a glance.

　　The width of the tire free adhesive tape is the same as that of the regular adhesive tape. The regular types are 4cm, 5cm, 10cm, and can also be customized. The thickness is usually 2.0mm, 2.5mm, and 3.0mm, and can also be customized.

AfterSalesService :

• 3.0mm thick road crack adhesive tape