Dezhou Zhengyu 6-meter-wide GH-2S high-density polyethylene geomembrane with a 2mm thickness error of zero

Description :

　　Polyethylene, also known as PE, is a milky white, semi transparent to opaque thermoplastic resin. Polyethylene geomembrane is a white particle of high molecular weight polymer that is free of D, odorless, and tasteless. Its melting point is approximately 110 ℃ -130 ℃, and its density is 918-0.965g/cm3; Has good heat and cold resistance. Good chemical stability, high rigidity and toughness, good mechanical strength, good resistance to environmental stress cracking and tearing, high anti-seepage performance. As the density increases, the mechanical and barrier properties will relatively improve, and the heat resistance and tensile strength will also be higher; Can withstand strong acid, strong alkali corrosion, oil salt, organic solvents, etc.

　　1、 Definition of geomembrane:

　　⑴ Geomembrane, a waterproof and barrier material produced from polymer materials.

　　⑵ Smooth geomembrane, a geomembrane with a flat and smooth appearance on both sides.

　　⑶. Textured geomembrane is a type of geomembrane produced through certain technological means, which has a uniform rough appearance on one or both sides.

　　⑷ High density polyethylene geomembrane, a geomembrane produced from medium to high density polyethylene resin (PE-MD) or high-density polyethylene resin (PE-HD), with a density of 0.940g/cm3 or higher.

　　⑸. Low density polyethylene geomembrane refers to geomembranes produced from materials such as density polyethylene resin (PE-LD), linear low-density polyethylene resin (PE-LLD), and ethylene copolymers, with a density of 0.939g/cm3 or less.

　　⑹ Linear low-density polyethylene geomembrane, a geomembrane produced from linear low-density polyethylene resin (PE-LLD) with a density of 0.939g/cm3 or less.

　　2、 Conventional models of geomembranes:

　　The quality of geomembrane products shall comply with the national standards GB/T17643-2011 and CJ/T234-2006.

　　⑴. 2.0mmHg HDPE geomembrane:

　　Also known as 2mm thick high-density polyethylene geomembrane, anti-seepage membrane, smooth HDPE geomembrane, and rough HDPE geomembrane;

　　The product is usually 6 meters wide by 30 meters long (roll)=180 square meters; Each square meter weighs about 1900 grams; Each roll weighs 340 kilograms.

　　⑵. 1.5mmHg HDPE geomembrane:

　　Also known as 1.5mm thick high-density polyethylene geomembrane, anti-seepage membrane, smooth HDPE geomembrane, and rough HDPE geomembrane;

　　The product is usually 6 meters wide by 50 meters long (roll)=300 square meters; Each square meter weighs about 1425 grams; Each roll weighs 427 kilograms.

　　⑶. 1.0mmHg HDPE geomembrane:

　　Also known as 1.0mm thick high-density polyethylene geomembrane, anti-seepage membrane, smooth HDPE geomembrane, and rough HDPE geomembrane;

　　The product is usually 6 meters wide by 50 meters long (roll)=300 square meters; Each square meter weighs about 950 grams; Each roll weighs 285 kilograms.

　　⑷ 0.75mmHDPE geomembrane:

　　Also known as 0.75mm thick high-density polyethylene geomembrane, anti-seepage membrane, smooth HDPE geomembrane, and rough HDPE geomembrane;

　　The product is usually 6 meters wide by 50 meters long (roll)=300 square meters; Each square meter weighs about 712 grams; Each roll weighs 213 kilograms.

　　⑸. 0.5mmHDPE geomembrane:

　　Also known as 0.5mm thick high-density polyethylene geomembrane, anti-seepage membrane, smooth HDPE geomembrane, and rough HDPE geomembrane;

　　The product is usually 6 meters wide by 50 meters long (roll)=300 square meters; Each square meter weighs about 475 grams; Each roll weighs 142 kilograms.

　　【 Tip 】 The thickness of the above products can be adjusted according to customer requirements, with a thickness range of 0.2mm to 3.0mm;

　　【 Tip 】 The width of the above products can be adjusted according to customer requirements, with a width range of 0.5m-8m;

　　【 Tip 】 The length of the above products can be adjusted according to customer requirements, with a product length range of 15m-150m.

　　The description of the 2mm thick geomembrane produced by Dezhou Zhengyu 2.0mmHg HDPE Geomembrane Co., Ltd. is as follows:

　　1. Product thickness: 2mm thick

　　2. Product Material: High Density Polyethylene (HDPE)

　　3. Product density: 0.940

　　4. Product Quality Execution Standards: GB/T17643-2011, CJ/T234-2006

　　5. Product dimensions: regular width of 6 meters, 7 meters, 8 meters; Each roll is 30 meters long and 50 meters long.

　　1、 Dezhou Zhengyu geomembrane specifications and models [2.0HDPE geomembrane, 1.5HDPE geomembrane, 1.0HDPE geomembrane, 0.5HDPE geomembrane]; (Dezhou Zhengyu) Geotextile Model Specification [Permeable Geotextile, Filter Geotextile, Isolation Geotextile]; Dezhou Zhengyu composite geotextile model specifications [one fabric, one membrane, two fabrics, one membrane, waterproof geotextile, anti-seepage geotextile]; (Dezhou Zhengyu) Grass proof cloth【Cover grass clothTheweed control fabricGrass covering cloth, orchard grass proof cloth, ground cloth, horticultural ground cloth, polyethylene PE grass proof cloth, polypropylene PP grass proof cloth; Dezhou Zhengyu Bentonite Waterproof Blanket Model Specifications [GCL Sodium Bentonite Mat, 4500g Sodium Bentonite Waterproof Mat, 4800g GCL Sodium Bentonite Mat, 5000g GCL Sodium Bentonite Mat, 5500g Natural Sodium Bentonite Waterproof Blanket]; Dezhou Zhengyu Geotechnical Composite Drainage Network [5mm Height Geotechnical Composite Drainage Network, 6mm Height Geotechnical Composite Drainage Network, 7mm Height Geotechnical Composite Drainage Network, 6.3mm Height Geotechnical Composite Drainage Network, 7.5mm Height Geotechnical Composite Drainage Network]; Dezhou Zhengyu EVA Waterproof Board [Tunnel EVA Waterproof Board Manufacturer, 1.0EVA Waterproof Board, 1.2EVA Waterproof Board, 1.5EVA Waterproof Board, 2.0EVA Waterproof Board].

　　2、 Our company is a multi type geotechnical material production base enterprise in Dezhou Zhengyu, producing high-density polyethylene 2.0mm geomembrane with a nominal thickness of 2mm, an average thickness deviation of -5%, a tensile yield strength of 29N/mm, and a tensile fracture strength of 53N/mm. The product has a width of 6 meters or 8 meters, and each roll is 50 meters or 100 meters long. This 2.0mmHg HDPE geomembrane is widely used for anti-seepage of oil tank foundations, petrochemical pipelines, oil storage tanks, oil fields, and accident slurry tanks; Landfills for household waste, solid waste logistics, industrial waste, hazardous materials, landfill coverage, sanitary waste landfill coverage, and sanitary waste landfill treatment stations; Gold mine anti-seepage, iron mine anti-seepage, copper mine anti-seepage, lithium mine anti-seepage, coal mine anti-seepage, tailings landfill, dissolution pool, ash yard anti-seepage; Black film biogas digester, biogas slurry pool, oxidation pond, sewage storage tank; Sewage treatment tank, leachate regulating tank, rainwater collection tank, anti-seepage reservoir, agricultural irrigation water tank, chemical wastewater tank; Golf course landscape lake anti-seepage, landscape river channel, garden water system, landscape lake, artificial lake, landscape water pool; Fish pond anti-seepage, shrimp pond, turtle pond, loach breeding pond, eel breeding pond, leech pond breeding.

AfterSalesService :

• High density polyethylene geomembrane