High density polyethylene geomembrane with a thickness of 1.5 millimeters, corrosion-resistant, wear-resistant, and puncture resistant,

Description :

　　Polyethylene, also known as PE, is a milky white, semi transparent to opaque thermoplastic resin. Polyethylene geomembrane is a white particle of high molecular weight polymer that is free of D, odorless, and tasteless. Its melting point is approximately 110 ℃ -130 ℃, and its density is 918-0.965g/cm3; Has good heat and cold resistance. Good chemical stability, high rigidity and toughness, good mechanical strength, good resistance to environmental stress cracking and tearing, high anti-seepage performance. As the density increases, the mechanical and barrier properties will relatively improve, and the heat resistance and tensile strength will also be higher; Can withstand strong acid, strong alkali corrosion, oil salt, organic solvents, etc.

　　1、 Definition of geomembrane:

　　⑴ Geomembrane, a waterproof and barrier material produced from polymer materials.

　　⑵ Smooth geomembrane, a geomembrane with a flat and smooth appearance on both sides.

　　⑶. Textured geomembrane is a type of geomembrane produced through certain technological means, which has a uniform rough appearance on one or both sides.

　　⑷ High density polyethylene geomembrane, a geomembrane produced from medium to high density polyethylene resin (PE-MD) or high-density polyethylene resin (PE-HD), with a density of 0.940g/cm3 or higher. High density polyethylene geomembrane with a thickness of 1.5 millimeters, corrosion-resistant, wear-resistant, and puncture resistant

　　⑸. Low density polyethylene geomembrane refers to geomembranes produced from materials such as density polyethylene resin (PE-LD), linear low-density polyethylene resin (PE-LLD), and ethylene copolymers, with a density of 0.939g/cm3 or less. High density polyethylene geomembrane with a thickness of 1.5 millimeters, corrosion-resistant, wear-resistant, and puncture resistant

　　⑹ Linear low-density polyethylene geomembrane, a geomembrane produced from linear low-density polyethylene resin (PE-LLD) with a density of 0.939g/cm3 or less.

AfterSalesService :

• High density polyethylene geomembrane