LJH100 * 180 * 110 coal mining machine cable clamp, mining O-type cable clamp

Description :

　　LJH100*180*110Cable clamps for coal mining machines, O-type cable clamps for mining, cable clamps for coal mines

　　reinforcementLJH100 * 180 * 110 cable clamp for coal mining machineCompetitive awareness, fostering team spirit, and improvingLJH100 * 180 * 110 cable clamp for coal mining machineReputation, reputation expands sales, want to knowMining O-type cable clampPlease read the information below for this product.

　　LJH100*180*110Cable clamp for coal mining machinePurpose and scope of application:

　　The O-type cable clamp for coal mining machines is suitable for various types of drag type cable clamps used in coal mining machines with polymer plastics and carbon steel plates as raw materials, which are used on comprehensive mining and general mining units in coal mines.

　　1. This product is developed in accordance with the MT/T 775-1998 standard of the coal industry in the People's Republic of China, which specifies the technical conditions for towing cable clamps used in coal mining machines. And it complies with the relevant regulations of MT/117-2007.

　　2. Main structure and working principle of O-shaped cable clamp for coal mining machine: The main structure of the cable clamp consists of an O-shaped clamp made of polymer plastic wrapped in carbon steel skeleton, a cross plate, and a connecting pin shaft. Working principle: The product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　LJH100*180*110Cable clamp for coal mining machineworking principle

　　The working principle of cable tracks relies on the physical characteristics of cable tracks to protect the cables and water pipes in the coal mining machine. The cables and water pipes in the coal mining machine rely on the protection of cable tracks to enable high-speed operation of the coal mining machine.

　　LJH100*180*110Cable clamp for coal mining machinePrecautions for use

　　Strictly follow the operating procedures and eliminate the mentality of taking chances

　　Strictly follow the MT/T 117-2007 standard when using

　　Before use, the operator should carefully inspect the cable track body and components for defects or cracks.

　　Whether the edge connection is firm, whether various accessories are loose, etc., to prevent accidents from happening.

　　To ensure the reliability of product performance, performance testing must be conducted on an annual basis.

　　LJH100*180*110Cable clamp for coal mining machinestructure

　　The cable clamp is a composite structure composed of four injection molded plates with embedded steel frames. The assembly method is to rotate and fix the embedded metal rods, and the connection method is to use special bolts. The injection molding material is wear-resistant engineering plastic, and the embedded metal frame is made of stamped steel plates and cold drawn round steel. The connection size, as well as the diameter of the connecting bolts and pin holes, have been standardized, and the series can be interchangeable and modified into various specifications.

　　LJH100*180*110Cable clamp for coal mining machineInstallation and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

AfterSalesService :

• Cable clamp for coal mining machine