LJC 125 * 180 * 130 coal mining machine cable clamp can be customized with drawings for mining C-type cable clamps

Description :

　　LJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineCan customize mining C-type cable clamps based on drawings

　　Our company's main products areLJH100*one hundred and eighty*Cable clamp for 140 coal mining machineThe mining cable hook is made of polymer composite material, which has high strength, acid and alkali resistance, impact resistance, and good toughness.Mining H-type cable clampThis material cable clamp can provide better protection for coal mining machine cables and water pipes. Other products of the company include mining cable hooks, mining pipeline hooks, and other products.

　　1LJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineProduct Introduction

　　The H-type cable clamp of the coal mining machine is made of stamped steel plate as the skeleton and modified plastic (polyethylene+flame retardant+anti-static agent) processed by injection molding. It is connected to the protective channel of the cable or water pipe through special bolts according to the needs of the coal mining machine working face. This product overcomes the disadvantages of traditional cable clamps, such as low mechanical strength and ineffective protection on both sides. When the cable is clamped in the cable tray, it is easily damaged by debris and coal blocks in the tray, and the guiding effect is not ideal. It is easy to hang and fold, and can overcome the common causes of cable damage such as "pulling", "folding", "hanging", "smashing", and "squeezing". It can provide comprehensive protection for cables and water pipes.

　　IILJC 125*one hundred and eighty*Cable clamp for 130 coal mining machinePurpose and scope of application:

　　Cable clamps for coal mining machines are suitable for use on fully mechanized and general mining units in coal mines, and are made of polymer plastics

　　Dragged cable clamps for various models of coal mining machines made from carbon steel plates. Cable clamp for coal mining machine

　　The board adopts the technical conditions for towing cable clamps for coal mining machines in the coal industry of the People's Republic of China

　　Research and development of MT/T 775-1998 standard. And it complies with the relevant regulations of MT/117-2007.

　　3、 The main structure of cable clamps for coal mining machines is that the cable clamps are made of polymer plastic wrapped in carbon steel skeleton

　　It consists of an O-shaped clamp plate, a cross plate, and a connecting pin shaft.

　　4LJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineperformance

　　1. Surface resistance

　　The arithmetic mean of the surface resistance on both the upper and lower surfaces of the non-metallic raw material specimen of the cable clamp shall not exceed 3 * 108 Ω.

　　2. Combustion performance of alcohol spray gun

　　The arithmetic mean of the flame burning time of the alcohol spray lamp for non-metallic raw material specimens of cable clamps shall not exceed 3 seconds, and the single value of the flame burning time for each specimen shall not exceed 3 seconds

　　The arithmetic mean of the flameless combustion time of the specimen shall not exceed 10 seconds, and the single value of the flameless combustion time of each specimen shall not exceed 30 seconds.

　　3. Combustion performance of alcohol lamp

　　Mining C-type cableThe arithmetic mean of the flame burning time of the alcohol lamp for non-metallic raw material specimens shall not exceed 6 seconds, and the single value of the flame burning time for each specimen shall not exceed 6 seconds

　　The arithmetic mean of the flameless combustion time of the specimen shall not exceed 20 seconds, and the single value of the flameless combustion time of each specimen shall not exceed 60 seconds.

　　IIILJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineWorking Principle:

　　This product is suspended and installed on the towing frame of the coal mining machine, moving together with the coal mining machine. Mainly responsible for protecting the cables and water pipes used in underground coal mining machines

　　To prevent cable and water pipe breakage and wear.

　　5LJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineInstallation and use:

　　(1). First, insert the T-shaped plug of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, aligning the semi-circular positioning hole of the T-shaped plug with the positioning pin hole of the clamping plate, and positioning the positioning pin

　　Cable clamp groove

　　(2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. (The final length of the work depends on the needs).

　　(3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp for the use of the coal mining machine

　　LJC 125*one hundred and eighty*Cable clamp for 130 coal mining machineThe product specifications and models are complete, and can be continuously updated and improved according to the actual use of users to ensure that the discharge of cables and water pipes achieves the desired effect.Mining C-type cable clampWelcome new and old customers to call for consultation.

AfterSalesService :

• Cable clamp for coal mining machine