LJO125 * 185 * 155 coal mining machine cable clamp has good use effect, O-shaped cable clamp

Description :

　　LJO125*one hundred and eighty-five*one hundred and fifty-fiveThe use of cable clamps for coal mining machines is effective, and O-type cable clamps are effective

　　Our company's main products include cable clamps for coal mining machines and cable hooks for mining,LJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampThis product is made of polymer composite materials, which have high strength, acid and alkali resistance, impact resistance, and good toughness. This material cable clamp can provide better protection for coal mining machine cables and water pipes. Other products of the company include mining cable hooks, mining pipeline hooks, and other products. The product specifications and models are complete and can be continuously updated and improved according to the actual use of users,O-type cable clamp

　　To ensure effective discharge of cables and water pipes

　　1LJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampPurpose and scope of application:

　　This product is suitable for various types of drag type cable clamps used in coal mining machines with polymer plastics and carbon steel plates as raw materials, which are used in fully mechanized and general mining units in coal mines.

　　1. This product is produced in accordance with the standard MT/T 775-1998 of the coal industry in the People's Republic of China, which specifies the conditions for towing cable clamps for coal mining machines. And it complies with the relevant regulations of MT/117-2007.

　　IILJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampMain structure and working principle: The cable clamp is composed of an O-shaped clamp plate, a cross plate, and a connecting pin shaft made of polymer plastic wrapped in carbon steel skeleton. Working principle: This product is suspended and installed on the towing cable frame of the coal mining machine, and moves together with the coal mining machine. The main function is to protect the cables and water pipes used in underground coal mining machines, in order to prevent cable and water pipe breakage and wear.

　　IIILJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampInstallation and use: (1) First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot (2). Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face. (3). Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

　　4LJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampNotes:

　　1. When transporting this product, attention should be paid to the protection of the connecting parts.

　　2. The product should be stored in an indoor warehouse with a temperature range of -15 ℃ to+40 ℃, avoiding contact with open flames.

　　3. When installing, make sure to insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates respectively, and then use a rubber hammer to knock the horizontal connecting plate in place; Make the semi-circular positioning hole of the T-shaped plug concentric with the positioning pin hole of the clamp plate; Insert the positioning pin into the positioning pin hole and tap it into place with a rubber hammer.

　　5LJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampProduct Features

　　The cable clamp used for coal mining machines is lightweight, small in size, compact in structure, easy and fast to install, simple to maintain and repair, and has a long service life. It also has high tensile strength and impact resistance. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from breakage or damage during the dragging process, improve production efficiency, and reduce maintenance costs.

　　Our factory's mission is to prioritize reputation, put customers first, offer reasonable prices, and ensure timely supply,LJO125*one hundred and eighty-five*one hundred and fifty-fiveCoal mining machine cable clampSurvive by quality and develop by quality. We will continuously strengthen internal management,O-type cable clampAdopting mature processes to further improve quality and provide better services for new and old customers.

AfterSalesService :

• Coal mining machine cable clamp