Mining DN200 steam water separator YJQC gas water separator compressed air pipeline use

Description :

　　DN200Soda water separator, YJQC air-water separator, 4-inch soda water separator

　　DN200steam-water separatorSurvival through quality, development through reputation, we doDN200 steam water separatorOur strategy is to seek quality, and our policy is to prioritize reputation.YJQC gas water separatorQuality comes from, value comes from belief.

　　DN200steam-water separatorIntroduction;

　　YJQCgas-water separatorAlso known as water separator, gas-liquid separator, and oil-gas separator, they are mainly used for removing water and oil from compressed air, steam, methane and other media. Depending on the structure, they can be divided into baffle type, centrifugal type, baffle type, and adsorption type. The working principle of a cyclone type steam water separator: a large amount of steam containing water enters the steam water separator and moves downwards in a centrifugal inclined manner; The entrained water is separated due to a decrease in velocity; The separated liquid flows through the drain valve and is discharged, while the dry and clean steam is discharged from the outlet of the separator.

　　DN200steam-water separatorworking principle

　　Due to the different densities of gas and liquid, when liquid flows together with gas, if it passes through a wire mesh, it is like sieving. The gas passes through, while the liquid is intercepted and remains on the wire mesh. At the same time, it is subject to gravity, and the gas still flows in its original direction. The positive pressure automatic water discharge device for liquid flows to the bottom of the separator, which means that the liquid and gas tend to separate in the gravity field. The downward liquid adheres to the wall and gathers together through the discharge pipe.

　　DN200steam-water separatorTechnical Specifications:

　　Design pressure: 1.5Mpa

　　YJQCgas-water separatorPressure loss: ≤ 0.002 Mpa

　　Separation efficiency: 99%

　　Interface size: DM15-350

　　Interface form: flange PN1.6/PN2.5/PN4.0

　　DN200steam-water separatorAdvantages:

　　1. Simple design

　　2YJQC gas water separatorThe equipment is simple to manufacture and easy to install

　　3. Low resistance

　　4. Small size

　　DN200steam-water separatorInstallation and usage precautions

　　l、 Before installation, the pipeline must be purged with pressure gas to remove dirt and debris.

　　2YJQC gas water separatorIt should be installed at the location of the coal mine air duct, and it is recommended to install shut-off valves before and after the separator.

　　3. Installation direction: The arrow on the valve body points in the same direction as the fluid in the pipeline (the arrow on the valve body points to the fluid outlet port).

　　4YJQC gas water separatorThe lower part should be equipped with a water valve, and the selection of Chengshuirun should be based on the displacement and operating conditions

　　5. To prevent malfunction of the gas water separator and the lower drain valve due to blockage by dirt, it is recommended to install a filter in front of the drain valve and regularly clean it to ensure efficient operation of the equipment.

AfterSalesService :

• DN200 steam water separator