FQW25-50 Pneumatic Pump Technical Parameters QYW Mining Pneumatic Submersible Pump Characteristics

Description :

　　FQW25-50Pneumatic pump, QYW mining pneumatic submersible pump, mining pneumatic pump

　　We doFQW25-50 pneumatic pumpQuality is produced, not inspected. We make itFQW25-50 pneumatic pumpFully understand the customer's needs, faults, complaints, and grievances,QYW Mining Pneumatic Submersible PumpGood quality, more affordable economy

　　FQW25-50Pneumatic pumpTechnical Specifications:

　　1. Volume ratio of sand, slag, and water in water: ≤ 6%

　　2. Density of sewage: ≤ 110kg/m3

　　3. FQW mining pneumatic water pump maximum submergence depth: ≤ 5m

　　4. PH value of water: 6-8

　　5. Use wind pressure control within the range of 0.15~0.65Mpa;

　　6. FQW mining pneumatic water pump with maximum diameter larger than solid particles: ≤ 6mm

　　7. Operating temperature: 0~60 ℃

　　8. FQW mining pneumatic water pump matching rubber hose inner diameter: a. Inlet pipe: Φ 25mm; b、 Exhaust pipe: Φ 50mm~Φ 64mm; c、 Water outlet pipe: Φ 40mm~Φ 50mm

　　FQW25-50Pneumatic pumpworking principle

　　1. Pump body part: divided into upper and lower chambers, with a sealing ring separating air and water in the middle. The sealing ring adopts spring sealing and utilizes the pressure of air and water to allow high-pressure air and water to enter separately

　　The inner walls of the upper and lower sealing rings are inflated to enhance the sealing effect.

　　2. Overflow section: composed of water turbine, pump cover, suction port, pump seat, etc. The water wheel is installed on the rotor shaft in the lower chamber of the shell, and compressed air is sent in from the inlet. The rotor runs to drive the water wheel, and the water in the water wheel is pressed into the outlet vortex of the shell under the action of centrifugal force, and discharged along the outlet pipe.

　　3. Pneumatic motor part: composed of rotor, turbine, bearings, etc. Powered by compressed air, the impact turbine drives the rotor to operate at high speed and perform work.

　　FQW25-50Pneumatic pumpTechnical Features

　　The pneumatic submersible pump has a compact structure, making it easy to move, disassemble, and maintain. The pump body vortex adopts a G-efficiency energy-saving hydraulic model, and the impeller is specially designed. The water pump has strong sewage discharge capacity and large flow rate,

　　Advantages such as high head.

　　FQW25-50Pneumatic pumpadvantage:

　　1. Stepless speed regulation. As long as the throttle valve opening program is controlled, that is, the gas flow rate is controlled, stepless speed regulation can be achieved.

　　2. Equipped with a silencing device, it has low noise, easy maintenance, and small vulnerable parts.

　　3. Reliable to use, durable, not affected by temperature and vibration, easy to install and operate.

AfterSalesService :

• Pneumatic pump