304 stainless steel belt crusher function fruit juicer pear ginger tomato juicer

Description :

　　The main component of this equipment is a spiral, which gradually increases in diameter along the direction of the slag outlet and decreases in pitch. When the material is pushed forward by the spiral, the volume of the spiral cavity shrinks, forming a squeezing effect on the material.

　　The rotation direction of the spiral spindle when viewed from the feeding hopper towards the slag hopper is in the direction of the needle. The raw materials are added to the feeding hopper and are compressed under the push of the screw. The squeezed juice flows into the bottom juice container through the filter screen, while the waste is discharged through the gap formed between the screw and the conical part of the pressure regulating head. The size of the gap can be adjusted by moving the pressure regulating head along the axial direction. When transferring the handwheel bearing seat clockwise by hand (looking from the slag discharge groove of the equipment towards the feeding hopper), if the pressure regulating head is turned to the left, the gap will decrease, otherwise the gap will increase. Changing the size of the gap, that is, adjusting the resistance of the slag, can change the juice yield. However, if the gap is too small, under strong squeezing, some of the slag particles will be squeezed out through the filter screen together with the juice. Although the juice yield increases, the quality of the juice relatively decreases. The size of the gap should be determined according to the specific process requirements of the user.

　　The pulp and residue separation fruit juicer is a model used in the catering and food industries The fruit can be chopped and ground into a paste, and the fruit juice and residue can be left through the pulp outlet and residue outlet

　　Equipment structure and principle:

　　 It consists of front support seat, feeding hopper, spiral, filter screen, juice container, rear support, slag discharge groove and other parts. The left end of the spiral spindle is supported in the rolling bearing seat, and the right end is supported in the handwheel bearing seat. The electric motor drives the spiral to work through a pair of triangular belt pulleys.

　　 Juicing: The main components are the pulp, juice, and skin that have been removed from the core and enter the screw juicer through a hopper. The screw gradually increases in diameter and decreases in pitch along the direction of the slag outlet. When the material is pushed by the screw, the volume of the screw cavity shrinks, forming a squeezing process for the material. The rotation direction of the spiral spindle is clockwise when viewed from the feeding hopper towards the slag hopper. The raw materials are added to the feeding hopper and are compressed under the push of the screw. The squeezed juice flows into the bottom juice container through the filter screen, while the waste is discharged through the annular gap formed between the screw and the conical part of the pressure regulating head. The size of the gap can be adjusted by moving the pressure regulating head along the axial direction. Used in a clockwise direction (when looking at the handwheel bearing seat from the slag discharge chute of the equipment towards the feeding hopper end, if the pressure regulating head is turned to the left, the gap will decrease, otherwise the gap will increase). Changing the size of the gap, that is, adjusting the resistance of slag discharge, can change the slag discharge rate. However, if the gap is too small, under strong compression, some of the slag particles will be squeezed out together with the juice through the filter screen

　　Xinjiaqiang Machinery Manufacturer

AfterSalesService :

• crusher