Yucheng FBQ300 gas pipeline explosion-proof device DN300

Description :

　　YuchengFBQ300Gas pipeline explosion-proof deviceDN300

　　FBQ300Gas pipeline explosion-proof device,DN300Explosion proof device, gas pipeline explosion-proof device diameterthree hundred

　　What is FBQ300 gas pipeline explosion-proof device? The FBQ300 gas pipeline explosion-proof device is installed on the suction and exhaust ends of the gas pump. When gas is pumped out, the gas enters the water through the inlet bend and then precipitates out of the water. It is discharged through the outlet bend and isolated from the inlet and outlet pipelines by a water seal; When an explosion occurs at one end, a continuous explosion cannot be formed under the isolation of the water seal. At this time, the rubber plate of the pressure relief device is flushed open to release pressure, protecting the safety of the well, pumping station equipment, and users.

　　1、 Characteristics of FBQ300 gas pipeline explosion-proof device:

　　1. The structure of FBQ300 gas pipeline explosion-proof device is simple, economical and practical;

　　2. The FBQ300 gas pipeline explosion-proof device consists of an inlet pipe, an outlet pipe, an explosion-proof cover rubber plate, a round iron cylinder, a water level gauge, an automatic water adding device, etc

　　3. The FBQ300 gas pipeline explosion-proof device is used to extract or discharge gas through the water cover during normal drainage. The automatic water addition device can keep the water seal of the FBQ300 gas pipeline explosion-proof device constant at the preset position;

　　4. Once an explosion or combustion occurs inside the gas pipe, the explosion wave and flame are isolated by the water seal, and at the same time, the explosion-proof cover rubber plate is opened or broken, releasing the explosive energy.

　　2、 Instructions for using FBQ300 gas pipeline explosion-proof device:

　　1. Install the FBQ300 gas pipeline explosion-proof device on the inlet and outlet ends of the gas pump's suction and exhaust pipelines. After the connection is completed, inject water from the inlet valve at the upper end of the device. The water level can be observed through the gauge plate and should not exceed the support baffle. It should be kept at the middle position of the warning line above and below the liquid level gauge. During use, close the inlet valve.

　　2. The FBQ300 gas pipeline explosion-proof device must be used within the calibrated pressure range on the nameplate. During use, the water level should be regularly observed and inspected. If gas leakage occurs, it should be stopped immediately.

　　3、 Structure of FBQ300 gas pipeline explosion-proof device: The FBQ300 gas pipeline explosion-proof device consists of an inlet pipe, an outlet pipe, an explosion-proof cover rubber plate, a round iron cylinder, a water level gauge, an automatic water adding device, etc.

　　Pay attention to selecting the type of gas pipeline explosion-proof device based on the diameter of the gas drainage pipeline. Tai'an Yucheng has a complete range of models, skilled workers, and fast delivery. If you have any intention of cooperation, please feel free to contact me.

AfterSalesService :

• FBQ300 gas pipeline explosion-proof device