Small belt dewatering machine Huzhou belt dewatering machine processing machinery

Description :

　　Kesheng and its employees share the vitality and pioneering spirit of an emerging city like Zhucheng, while also having rich experience in sewage treatment. The company has complete technical processing equipment and non-standard design, manufacturing, and service capabilities for environmental protection equipment.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end in the direction of rotation of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　The vertical scraper discharge centrifugal dewatering machine is structurally similar to the horizontal one. Just the arrangement is different. The working principle is basically the same.

　　The vibration system and excitation method of vibrating discharge centrifuges from different manufacturers are different, but the basic principle is the same. According to the form of screening inside the centrifuge, it is divided into two types: horizontal vibrating centrifuge and vertical vibrating centrifuge.

　　The transmission system includes two types of motion transmission: one is the transmission of centrifugal rotational motion; The other is the transmission of axial reciprocating vibration on the sieve basket. Centrifugal rotational motion is mainly generated by the rotation of the main motor, which is transmitted to the sieve blue through pulleys, belts, and bearings. Vibration inertia force is generated by the rotational motion of paired cam swing blocks, which are transmitted to the sieve basket through rubber springs of different shapes to form axial reciprocating motion.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Small belt dewatering machine