Customized belt dewatering machine manufacturer Shijiazhuang automated mud belt dewatering machine

Description :

　　Kesheng and its employees share the vitality and pioneering spirit of an emerging city like Zhucheng, while also having rich experience in sewage treatment. The company has complete technical processing equipment and non-standard design, manufacturing, and service capabilities for environmental protection equipment.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end in the direction of rotation of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　The vibrating centrifugal dewatering machine discharges materials through vibration, while the scraper centrifuge does not have a vibration system. It forcefully discharges materials from the sieve basket through the rotation of the scraper. The scraper unloading centrifugal dewatering machine is limited by the gap between the scraper and the sieve basket, and has certain requirements for the size of the incoming particles. The vibrating centrifuge has strong adaptability and can handle particle sizes up to 60mm. However, the feeding particle size of the scraper centrifuge cannot exceed 25mm. From the working process of the scraper centrifuge, it can be inferred that its ability to crush coal is higher than that of the vibrating centrifuge. The scraper centrifuge has better dewatering performance compared to the vibrating centrifuge.

　　The main purpose of the lubrication system is to lubricate the rotating bearings with oil, reduce the working temperature of the bearings, and maximize the service life of the bearings.

　　Dehydrators generally refer to centrifugal dehydrators used in coal mines in the field. Vibration centrifugal dehydrators and scraper discharge centrifugal dehydrators are two commonly used centrifugal dehydrators in coal mines.

　　As long as you choose Keshenghe, you will definitely be infected by the corporate spirit of "honest management, unity and pragmatism, pioneering innovation, and striving to be the first" of Keshenghe employees, and also feel the sincerity of Keshenghe people.

AfterSalesService :

• Customized manufacturer of belt dewatering machine