Gypsum desulfurization belt dewatering machine Zigong belt dewatering machine processing machine

Description :

　　Kesheng and its employees share the vitality and pioneering spirit of an emerging city like Zhucheng, while also having rich experience in sewage treatment. The company has complete technical processing equipment and non-standard design, manufacturing, and service capabilities for environmental protection equipment.

　　According to the arrangement of the sieve basket, it can also be divided into two types: horizontal and vertical. The scraper unloading centrifugal dewatering machine uses the centrifugal force generated by the rotation of the sieve blue to dehydrate the material, and uses a scraper to discharge the dehydrated material from the sieve blue. Overall, it can also be divided into body components, buffer systems, transmission systems, and lubrication systems.

　　The main purpose of the lubrication system is to lubricate the rotating bearings with oil, reduce the working temperature of the bearings, and maximize the service life of the bearings.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end in the direction of rotation of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　The vibration system and excitation method of vibrating discharge centrifuges from different manufacturers are different, but the basic principle is the same. According to the form of screening inside the centrifuge, it is divided into two types: horizontal vibrating centrifuge and vertical vibrating centrifuge.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Gypsum desulfurization belt dewatering machine