Equipment diagram of plastic waste incinerator, price of Mushuke garbage incinerator

Description :

　　Shandong Keshenghe Environmental Protection Technology Co., Ltd. is located in Zhucheng, a county in China. We are a company that integrates independent research and development, manufacturing, and technical services, producing environmental protection equipment and engineering general contracting. Zhucheng is an emerging industrial city and a coastal open city approved by the state on the Shandong Peninsula. The splendid ancient civilization and rapid economic development have formed a vibrant modern urban new style on this beautiful and rich land. It is adjacent to the coastal city of Qingdao to the east and the port city of Rizhao to the south, with convenient water, road, and air transportation.

　　Retention time refers to the time required for harmful components in waste to undergo oxidation and decomposition under incineration conditions, and then complete harmless substances. The length of retention time directly affects the destruction rate of incineration and also determines the specific size of the furnace. There are many factors that affect the retention time, such as incineration temperature, excess air coefficient, and the degree of mixing of air with waste in the furnace. To ensure the complete decomposition of waste and combustion products, the waste is kept in the incinerator at around 600 ℃ for about 1 hour.

　　The furnace body is a cavity built on the upper part of the grate with refractory materials, insulation materials, and thermal insulation materials, wrapped in steel plates to prevent smoke leakage and keep the surface temperature of the furnace body below 50 ℃. There is a maintenance door on the side of the furnace body, and the ignition burner is also located on the side. The furnace body is equipped with an operating console.

　　The flue gas in the furnace flushes the material from bottom to top, drying the moisture in the material and igniting it in a timely manner. In addition, the front and rear arch refractory materials store heat and radiate the material, thereby ensuring the combustion temperature of the material. Extended the residence time of flue gas, completely burned the organic matter in materials and fly ash, and improved the destruction rate of harmful substances.

　　The function of the combustion assistance system is to ignite and incinerate materials (when the material's calorific value is low and cannot maintain its own combustion). Natural gas fuel and air are mixed and burned in the combustion head of the burner, and the combustion parameters obtained by adjusting the combustion air and combustion head can be controlled. The burned gas is recycled in the combustion head, which can reduce the emissions of pollutants, especially nitrogen oxides (NOx). It has functions such as fully automatic management of combustion programs, flame detection, automatic judgment and fault prompt.

　　In order to solve the problems of sexual smoke and carbon black pollution, the first measure taken was to increase the incineration temperature to 700 ℃, and later further increase it to 800-1100 ℃. At that time, people were already aware of the impact of combustion air volume and input method on flue gas temperature, so measures such as raising chimneys, configuring air supply fans and induced draft fans were successively adopted to increase ventilation and meet the demand for combustion air volume in the incineration process. After the chimney is raised, it also solves the problem of the diffusion of neutral and harmful substances in the flue gas.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Plastic waste incinerator equipment