Sludge squeezing belt dewatering machine Shandong pile driving mud belt dewatering machine

Description :

　　Shandong Keshenghe Environmental Protection Technology Co., Ltd. is located in Zhucheng, a county in China. We are a company that integrates independent research and development, manufacturing, and technical services, producing environmental protection equipment and engineering general contracting. Zhucheng is an emerging industrial city and a coastal open city approved by the state on the Shandong Peninsula. The splendid ancient civilization and rapid economic development have formed a vibrant modern urban new style on this beautiful and rich land. It is adjacent to the coastal city of Qingdao to the east and the port city of Rizhao to the south, with convenient water, road, and air transportation.

　　The vertical scraper discharge centrifugal dewatering machine is structurally similar to the horizontal one. Just the arrangement is different. The working principle is basically the same.

　　The vibration system and excitation method of vibrating discharge centrifuges from different manufacturers are different, but the basic principle is the same. According to the form of screening inside the centrifuge, it is divided into two types: horizontal vibrating centrifuge and vertical vibrating centrifuge.

　　The belt dewatering machine body contains many components, among which the important components are the central shaft and hollow shaft in the middle of the body. It is the key to achieving simultaneous operation of the sieve basket and scraper. And different ratios of pulley (or gear) diameters are the key to achieving different speeds between the sieve and scraper.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end along the rotation direction of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　Kesheng and Environmental Protection Technology have established a solid and reliable business reputation and word-of-mouth. Innovation, sincerity, and progress are the principles of Kesheng and environmental protection. Adhering to the business philosophy of "honest development, mutual benefit and win-win", relying on a complete quality assurance system and after-sales service system.

AfterSalesService :

• Sludge squeezing belt dewatering machine