Anhui Yangmu Board Factory

Description :

　　Anhui Yangmu Board Factory Large scaleWood processing plantYangmu board, Yangmu square, Yangmu square detailed introduction

　　Anhui bleached poplar wood planks require bonding during use due to the relatively narrow width of bleached poplar furniture boards. The bleaching of poplar plywood can be carried out before or simultaneously with the tape.

　　Complex patterns require manual operation. Products that are easy to assemble in mass production can be glued together using a sewing machine. There are generally four types of single board adhesive combinations: paperless adhesive combination, paper tape combination, Z-type adhesive combination, and adhesive combination. There are two types of manual sewing: one is to sew by hand and stick thin wooden veneer. Two pieces of bark are overlapped on the substrate, and the joint is pressed with a ruler. A sharp knife is used to cut the two layers of bark along the edge of the ruler, and then the excess edge is pulled out from both sides of the joint, so that the two pieces of bark are directly glued together for decoration. On the surface of the substrate.

　　Another method is to manually sew the veneer before pasting. When sewing, first fix it with a strip, and then use continuous tape to place the wooden skin end together with the tape to prevent it from breaking during transportation.

AfterSalesService :

• Anhui Yangmu Board Factory