Tai'an wooden square manufacturer pine wood square building wooden square

Description :

　　Generally, boiling is used for cooking, and the temperature and time of cooking need to be controlled according to the tree species and the hardness of the wood, as well as the thickness of the sliced thin wood. Those with higher hardness require higher temperature, while those with thicker thin wood require longer time.

　　The brand performance characteristics of the new wood can steaming and cooking tank manufacturer are as follows: 1. The control mode is automatic electrical control, which is easy to operate. Technical parameters such as temperature and pressure can be set, making it safe, fast, easy to operate, efficient, and worry free to use. 2. Tank door safety interlock method: dual protection of pressure automatic safety interlock and manual safety interlock, completely solving the safety hazards caused by worker misoperation.

　　New Wood Can Steaming Pot Manufacturer Brand Technical Parameters New Wood Can Steaming Pot Manufacturer Brand Manual Quick Open Door Opening Device: The door opening method is a manual quick open door design with a safety interlock device. Turning the door opening handwheel can open or close the can door, and a single person can easily complete the operation steps of opening and closing the door. In case of power outage, the can door can be opened and closed normally.

　　New Wood Can Steaming Pot Manufacturer Brand Instructions: The sealing method of the new wood can steaming pot manufacturer brand uses an inflatable silicone sealing ring, which has a significantly better sealing effect than other methods. The can door can be opened and closed normally during power outages.

　　New Wood Can Steaming Pot Manufacturer Brand Procurement Notice New Wood Can Steaming Pot Manufacturer Brand Wood Steaming Process Example: Water Ash: Water temperature rises from 15 ℃ to 50 ℃, insulation for 4 hours, then rises from 50 ℃ to 90 ℃, with a heating rate of 2-3 ℃/hour, and insulation for 10 hours. Yellow Polo: Water temperature rises from 15 ℃ to 70 ℃, with a heating rate of 4-5 ℃/hour, and then the water naturally cools and soaks for 24 hours. Cinnamomum camphora: Water temperature rises from 15 ℃ to 80 ℃, with a heating rate of 4-5 ℃/hour, and then the water naturally cools and soaks for 24 hours. Oak: Water temperature rises from 15 ℃ to 50 ℃, insulation for 4 hours, and then further increases the water temperature to 100 ℃, with a heating rate of 2-3 ℃/hour, keep warm for 15-20 hours, then let the water cool naturally

AfterSalesService :

• Wood processing plant