Customized Yangmu fixed length board, Yangmu wooden board, Yangmu square fixed length Yangmu processing factory

Description :

　　Pine fixed length board pine fixed length processing factory

　　1Wood processing plantReasonable use of sound-absorbing materials

　　Selecting sound-absorbing materials on the workshop walls can reduce the reverberation caused by reflection and achieve the effect of noise reduction. Sound absorbing materials can absorb the sound energy incident on them. For example, glass, seaweed, foam, plastics and sound absorbing bricks are all very good sound absorbing materials. After selecting sound-absorbing bricks, the noise level can be reduced by 10-15 dB.

　　2Wood processing building barrier screens and partitions

　　Building barrier screens, partitions, or soundproof pipes inside the factory can effectively block the simultaneous sound source for operators. For example, placing machinery such as blowers and generators in soundproof rooms or inside soundproof enclosures can block the noise emitted by the machinery from the operator; At the same time, it can also place the mechanical operators in a soundproof operating room or control room, so that the operators are not affected or harmed by noise. In general, after selecting a barrier screen, the noise level can be reduced by 5-10 dB.

　　3Timber factory workers adopt personal protective measures

　　If some factories and enterprises are temporarily unable to adopt certain noise prevention and control measures due to technical or economic reasons, but the noise generated within the factory enterprise is strong, in response to this situation, the workers of the factory enterprise can adopt certain personal protective measures. For example, wearing earplugs, earmuffs, or soundproofing cotton, helmets, etc. can ensure the physical health of workers. This personal protective method also has the characteristics of simplicity, easy operation, and lower cost.

　　4Adopt targeted measures based on the causes of noise in wood processing plantsPine fixed length board

　　In the workshop of the factory, for the situation where equipment oscillation and wall oscillation are caused by the imbalance of mechanical equipment work and noise is generated, tension springs or shock-absorbing pads or dampers made of elastic materials can be added between the mechanical equipment and the foundation to effectively reduce energy transmission; It is also possible to dig trenches of a certain depth around the foundation of mechanical equipment to isolate oscillations and reduce noise pollution.

　　5. Use a silencer

　　The so-called "muffler" refers to a device that can attenuate sound and allow airflow to pass through. By installing this device in the airflow channel, aerodynamic noise can be controlled and reduced.

　　6Timely update of wood equipmentPine fixed length board

　　In addition to the above-mentioned measures for noise prevention and control of engineering equipment, prevention and control personnel also need to regularly replace outdated equipment in the factory. When purchasing new equipment for the factory, procurement personnel should take into account the noise standards of the product and use them as an important indicator to evaluate the overall performance of the product. Low noise and low oscillation equipment should be given priority. If the noise and oscillation of the equipment may have an impact on the environment, measures such as sound insulation, absorption, noise reduction, and shock absorption should be adopted to control the noise and oscillation of the equipment to a certain extent.

　　Wood processing plant

AfterSalesService :

• Wood processing plant