Wood mold inhibitor Wet wood mold inhibitor Wood square mold treatment

Description :

　　As a new type of mold inhibitor, "Chong Mo Ling II" is strictly operated according to the execution standard Q/GHY311-2008, and does not contain toxic substances such as sulfur compounds, heavy metals, dimethyl fumarate (DMF), etc. It meets the environmental requirements of the European Union and is also suitable for chopsticks, tableware and other products. The product does not produce waste after use and can be recycled. It is a new generation of comprehensive mold inhibitor.

　　2、 Chemical composition:Dithiocyanmethane, hydrolytic protease, fungicide, boric acid, pyrethroid insecticide, etc.

　　3、 Physical and chemical indicators:

　　Appearance: Light yellow powder (including crystals), slightly irritating odor

　　Solubility: Slightly soluble in water, relatively soluble in hot water (preferably above 65 ℃)

　　Effective ingredient (%) ≥ ---------98

　　Toxicity test (0.5%) ---------------------------------------------------------------

　　Mold proof rate (%) ≥ ---------98

　　Insect prevention rate (%) ≥ ----------90

　　Prevention period ≥ ---------1 year

　　4、 Performance UsageSuitable for insect and mold prevention of bamboo woven products and products made of wood, rattan, awns, sunflower, grass, and other materials.

　　5、 Usage concentration:

　　Wood material loose product: diluted 1:200 with water (preferably above 45 ℃)

　　Bamboo and rattan hard products: diluted 1:100 with water (preferably above 45 ℃)

　　6、 Potion configurationTaking the preparation of 100kg of a 2% concentration solution as an example.

　　A、 Fill the cement pool or tank with 90kg of clean water (cold water is sufficient) first.

　　B、 Put 1kg of medicine powder into the bucket. As the medicine is not easy to dissolve, the remaining 40kg of boiling water should be dissolved 4-5 times; After adding boiling water, stir with a bamboo pole for a few minutes to fully dissolve the medicinal powder, then pour the upper clear liquid into the cement pool (tank) and stir while pouring. Unsolved medication, repeat this process 4-5 times, then wash the remaining medication in the bucket and pour it into the pool (tank).

　　7、 Usage:

　　A、 To ensure the anti mold and insect period of bamboo and wood products after processing, the weight of the products should be increased by 10% to 15% after immersion.

　　B、 All bamboo products should be immersed in the prepared solution (not exposed to the water surface), and after reaching a weight gain of 10% to 15%, the solution should be taken out and dried. After air drying or sun drying, it should be packaged and stored in the warehouse, avoiding rain as much as possible to prevent the solution from being washed away and affecting the effect.

　　C、 The properties of the medicine prepared by this product are stable and can be reused without the need for disposal. When the medicinal solution cannot immerse bamboo and wood products, it should be added in a timely manner. The recommended ratio for supplementing the medicinal solution is 1:180 or higher.

　　8、 Attention:This product is acidic, so it cannot be in contact or mixed with metals or alkaline substances. Medications need to be kept by a dedicated person, and attention should be paid to ventilation during use. After operation, hands and feet should be washed with soap. Bamboo and wood products that require varnish can be further enhanced by soaking them in chemicals and drying them.

　　9、 Storage:Room temperature, cool and dry place, away from open flames.

　　10、 Packaging instructions:25kg/barrel; Valid for 3 years.

AfterSalesService :

• Wood mold inhibitor