Wood mold inhibitor and poplar board mold inhibitor treatment

Description :

　　The production cost of YZL-6 poplar wood planks is high. Due to the low temperature and high humidity during the low temperature season, the wood is easily eroded and damaged by fungi. Our wood mold inhibitor can be used to treat poplar and pine boards during the high temperature season to achieve the effect of mold prevention

　　All researchers in biology know that mold can survive under three conditions:

　　1. Moisture: Eucalyptus trees contain water, which is directly related to one element, mold wood. Excessive water not only causes mold wood, but also easily leads to plastic production, directly affecting the structural strength of wood products.

　　2. Nutrients: The nutrients required by the mold on eucalyptus planks are not only moldy, but also highly susceptible to the influence of insects.

　　3. Adequate oxygen air: Oxygen is the ultimate cause of mold and discoloration in eucalyptus plywood, but it is difficult to separate.

　　In addition to the three natural factors mentioned above, there is also an overlooked human factor, which is the adhesion of plywood. In recent years, with the continuous rise in the prices of urea and polyvinyl alcohol in China, many manufacturers have added a large amount of flour to increase the viscosity of plywood fillers in order to reduce costs and significantly reduce the original solid content of the adhesive, resulting in excessive nutrition. The NTS in plywood poses a significant risk of mold growth for plywood larvae in the future. No matter how good the quality of eucalyptus planks is, they will grow evergreen and moldy.

　　1、 Solid wood panel:

　　Solid wood panels can be made using our company's Keping wood anti mold agent, with a ratio of 1:50 (1 kilogram of wood anti mold agent to 50 kilograms of water), because the bubble water does not affect the material shape of the product itself, and then fully soaked for 3 minutes. Fishing until dry again, this type of wooden board will have good anti mold, sterilization, and insect effects, and meet the export standards of Europe and America. It is inexpensive, easy to use, and clear. It is currently the recommended method for preventing mold in solid wood panels!

　　2、 MDF plywood:

　　This type of board cannot be immersed in water and has a high water absorption rate. Therefore, we can use our company's specially produced board anti mold and antibacterial agent in a ratio of 1:20, and then paint it on the surface of the density board plywood. This type of wood will have good anti mold, antibacterial and insecticide effects, and meet European and American export standards. It is cheap and easy to use, and is currently a good method for density board plywood types!

　　mildew preventive

AfterSalesService :

• Wood mold inhibitor