Yangmu processing plant nearby Yangmu board factory wood processing plant

Description :

　　Suqian Wood Processing Factory generally has a large number of personnel, and the evacuation routes are not standardized. The fire-fighting facilities are relatively backward. Generally, the processing factory chooses to be located in the suburbs of the urban area, at the junction of urban and rural areas. There are no fire hydrants nearby. Once a fire occurs, fireworks quickly spread, smoke, fire, and trapped people are prone to not escaping in time due to the fire. Due to poor fire-fighting facilities, it is difficult to carry out self rescue. The water fire brigade extinguishes the fire, and trapped people are prone to danger such as burning, smoking, and suffocation

　　4、 Fire safety measures for wood processing enterprises

　　（1） Wood processing technology, corporate culture, and fire prevention requirements for buildings

　　1. Wood processing belongs to Class C production, and the fire resistance rating of its factory building should not be lower than Grade III The drying room (oven) and painting room should have a fire resistance rating of first or second level and be independent buildings If it is limited by conditions, it must

　　When you set up together, separate firewall applications.

　　2. Large scale wooden factories should be arranged in different zones. Production areas, timber material storage yards, administrative service management areas, and living areas can be separated by walls, green spaces, or road spaces.

　　3. Production workshops, timber yards, boiler rooms, etc. should maintain sufficient fire prevention measures in accordance with national regulations

　　Distance.

　　4. The plants in the poplar strip factory should be equipped with a circular fire path, or a passage for fire and a width of no less than 6 meters in a flat space.

　　5. The factory building should have sufficient safety exits for evacuation. Generally, we should have no less than two exits. The width of the evacuation corridors and doors should meet the development requirements of the design specifications, and external doors should be selected. The evacuation staircase should use this closed staircase.

　　The installation of electrical equipment in the poplar processing plant shall comply with the provisions of the Electrical Equipment Installation Regulations, and the motor shall be sealed

　　Closed type, conduits should be installed to lay wires, and protective devices for electrical equipment such as switches and distribution boxes should be provided.

　　2. High voltage lines should be arranged as far away from the factory area as possible or along the edges of the factory area. The service lines introduced into the factory area should be designed to shorten the introduction time as much as possible, in order to prevent system failures and fires caused by high-voltage lines.

AfterSalesService :

• Yangmu Processing Plant