Customized fan-shaped poplar board factory direct sales

Description :

　　Production process of cable tray and cable outlet plate:

　　Nowadays, most of China's cable reels are made of steel frames, and their manufacturing management methods are generally as follows:

　　1. Confirm the size of the cable reel according to the cable specifications, with a normal limit of 15 layers. Calculate the cable reel width and outer diameter by multiplying the outer diameter of the cable by the number of layers

　　2. A method for producing steel frames. In terms of angle (selection based on size of cable reel. Manufacturing).

　　3. Lay wooden boards for the external network of the skeleton.

　　You indicate that the entire wooden building cable reel in the picture is used for small cables, which may be the same as the steel reel.

　　1. Size first. The common ones are twice the width of the cable diameter and 10-15 times the cable diameter of the shaft diameter disc.

　　2. Manufacturing a reel shaft (i.e. a shaft through a cable reel). First, make two discs as the foundation for a cable reel.

　　3. Nail the baffle on the outer side of the disc shaft and lay the wooden board on the inner side (for disc cables)

　　Note: From the shaft side of the cable reel and baffle reel to the inner side of the opening, in order to prevent worn out cables (due to secure testing)

　　Detailed method:

　　1. Make a disc shaft bracket. According to the diameter of the disc shaft, the thickness of one wooden board can be subtracted (such as the diameter of the disc shaft being different after nailing many wooden boards) to make two discs. The discs should be a double-layer or wooden material thickness (such as being more sturdy after nailing the lining board). Drill a hole at the axis (for threading).

　　2. Make a baffle. According to the size of the baffle material, make two circular baffle nails (unusual holes on the axis) on the outside of the disc

　　3. Execute the axis of the disk. The plate on the scroll support is a drum shaped structure.

　　4. Nail board. Nail the baffle on both sides of the disc shaft for ultimate development and shaping.

AfterSalesService :

• Yangmu board