High quality wooden blocks for construction in Qingdao are available in stock from manufacturers

Description :

　　1. When storing building timber, attention should be paid to the dry and ventilated natural environment. Indoor ventilation is necessary, and direct sunlight should be avoided to prevent the timber from bending, otherwise it will harm the color of the timber.

　　2. In actual installation, it is possible to place a cushion strip or lay a layer of plastic moisture-proof film on the road surface, without placing it against the wall.

　　3. In addition, it is necessary to do a good job in cleaning the wooden blocks of the building. In summer, when the wind is strong, they should be cleaned frequently to avoid excessive environmental pollution and discoloration.

　　4. Of course, special attention should be paid to fire prevention. Due to the high temperature weather, corrosion prevention is as crucial as fire prevention.

　　Building timber requires

　　1. Apply a layer of protective paint on the building blocks to prevent them from coming into contact with the outside air, or use soaking solutions. As long as one method is achieved, it can effectively protect the blocks: drying and sealing.

　　2. There may be some microorganisms in the square wood, and their growth can also damage the building square wood. We can use plastic sealing or chemical treatment.

　　3. Avoid direct exposure to strong ultraviolet rays.

　　4. The square wood can also be treated with acid and alkali, boiled, heated, and oxidized with oxidants to inhibit active enzymes. These methods can keep the building square wood shiny and shiny forever. Building timber, building timber, building materials, timber, square timber

　　What should we do after the wooden blocks in the building deform

　　Architectural square wood is a type of wood that we particularly like, and it has many characteristics. So, what should we do if the architectural square wood deforms? Here are my tips.

　　Building timber is a very practical type of building timber in our decoration process. The building effect of building timber brings us a warm and romantic building effect. However, no matter how warm and romantic the building effect is, it cannot avoid the phenomenon of deformation of building timber after long-term use. So, what should we do after the deformation of building timber?

　　When decorating, pay attention to the following points to keep the moisture content of the building wood stable. Firstly, choose artificial wood as much as possible. Artificial wood has relatively stable properties because solid wood has already undergone deformation and cracking.

　　Hemlock wood is a commonly used building timber, and many construction sites use it as a formwork support. The size of dried hemlock is relatively stable and has good wear resistance throughout its entire use. After being sawn into wooden boards, hemlock wood is hard and not easily deformed, and is often used as glued beams in civil engineering projects. The annual rings of hemlock are relatively clear, and the dusk is elegant. How much does hemlock architecture cost? The texture is straight and uniform, and the wood is fine and dense,

　　Moderate hardness, good bending strength, and natural anti-corrosion ability. Hemlock construction wood can be treated with preservatives and fire retardants. Due to its good chemical treatment properties, hemlock is the best choice for high light and high-density wood that needs to be treated during use. Secondly, the bending strength of hemlock construction timber is also very high, and its plasticity and processability are better than other materials. Moreover, the use of construction timber in construction projects has a unique artistic sense.

AfterSalesService :

• Architectural timber