Hemlock wood square building wooden square construction site wooden square wood wholesale

Description :

　　Mold growth poses a significant threat to the ductility of construction wood on construction sites, but has little impact on its structural mechanical compressive strength. Mold growth also greatly increases the permeability of wood. A deeper level of scientific research has been conducted on the diagnostic permeability of wood materials. They emphasize that in construction sites with severe mold growth, the intake of oil additives and superheated steam injected into wooden columns is about 8-9 times that of healthy columns, while the axial penetration depth is 30-40 times greater. The general specifications are 4 meters long, including 23cm, 34cm, 44cm, etc.

　　Attention to details when using wooden blocks in construction. With the increase in engineering volume in recent years, people's demand for building timber is also growing. So, the question is how can we use it to increase its lifespan and effectiveness? Here are a few tips for everyone.

　　Little did they know that Douglas fir, which has more severe mold growth, has a digestion and absorption of additives that are 3-6 times greater than those of non mold growth columns that have been treated with pesticide fungicides, and its penetration depth is also relatively large. Piceasp. and Populus sp. have more severe mold growth, and their intake and penetration depth after soaking or work stress are 3-5 times greater than those of physically and mentally healthy wood. In this kind of scientific research, Trichoderma viride is used as the experimental vaccine. This kind of Aspergillus flavus can cause serious mold growth in wood. If the wet and cold wood is soaked and treated with corrosive additives and spray, it is not easy to stop this bacteria, but it will promote its growth and development. Wood is a flammable material, so we must take measures to prevent fires. Firstly, we need to find the source of the fire and stop it from the root. Today, we will talk about the reasons for fires on construction sites.

　　Do not use bleach. When there is moisture on the surface, try not to dehydrate or dry it. It should be naturally air dried to avoid damaging the texture of the square wood itself. We can use a neutral wood cleaner and carefully clean the surface contaminants with a wet mop, but be careful not to rinse directly with water. Afterwards, use a dry mop to wipe off excess moisture and maintain good ventilation in the environment

　　In the application process of construction site wooden blocks, it is necessary to do a good job in waterproofing methods. The wooden blocks used in rooms must be well waterproofed and naturally ventilated. Generally, water-soluble dust can be cleaned with orange peel water. Construction site wooden blocks are susceptible to the harm of decay bacteria? Avoid direct exposure to strong ultraviolet rays.

　　The decay of wooden blocks on construction sites is often caused by bacteria, which are generally divided into three types: 1. Aspergillus flavus, 2. Decaying bacteria, and 3. Color fading bacteria. Rotting bacteria are the key bacteria that cause diseases, and the two are relatively less harmful.

　　A new achievement in wooden architecture is the CLT hybrid system, which combines square timber with steel components in engineering construction. Due to their ability to create complex shapes, such building materials are becoming increasingly popular and used. Experts believe that the main difficulty to overcome now is not the limitation of materials, but the lack of experience in the construction industry. For the new era of wooden architecture, the resistance is prejudice. Although there are already many wooden structures, people often choose the former between concrete and wood. Even banks may choose concrete buildings when providing mortgages, believing that wooden structures pose greater risks.

AfterSalesService :

• Hemlock wood square