NR310 hardener wear-resistant floor hardening material

Description :

　　process flow

　　Step: When the leveling layer is not yet dry, evenly spread the aggregate on the leveling layer;

　　Step 2: Strengthen the corners and grind the ground flat;

　　Step 3: Saw open the concrete at the appropriate position, make expansion joints, and fill them with the required joint filler;

　　Step 4: Apply transparent sealant roller, smooth with an electric trowel, smooth, finish, and cure

　　Technical indicator 1: The wear resistance is enhanced by 32.5% compared to ordinary concrete;

　　2. Anti water seepage, oil seepage, anti slip, reducing water loss by 93%;

　　3. Hardness: After 7 days of hardening, the strength can be increased by 40%, and the impact resistance can be increased by 13.3%

　　4. Adhesive strength: can increase epoxy resin by 17%

　　5. Anti slip: Anti slip fine count. 86 (dry). 69 (wet)

　　6. Penetration: Penetration force reaches 0.022CC/hour. (1.83-meter hydrostatic test)

AfterSalesService :

• NR310 hardener