Si-CA 030 combustion efficiency analyzer imported from Solman Europe in France

Description :

　　Main functions? Screen 2.8-inch color LCD display,

　　Screen resolution: 320 x 240 pixels, making it easier for operators to view measurement data.

　　The host is equipped with a rechargeable battery with an input power of 5V/2A. The icon in the upper right corner of the screen displays the power level.

　　To ensure that the battery is fully charged, please ensure that the charging time is at least 6.5 hours. Power input voltage 100-240V, 50/60Hz. USB charging interface. ?

　　The smoke suction pump analyzer is equipped with a diaphragm pump with a motor installed inside, which is directly powered by the analyzer in DC mode to obtain the smoke suction force. Stainless steel smoke probe with standard length of 180mm or 300mm, equipped with plastic handle and adjustable positioning cone, ensuring that the top of the probe can fully extend into the flue.

　　The replaceable gas sensor analyzer uses electrochemical sensors to measure oxygen (O2) and (CO).

　　Regularly charging the analyzer can ensure that the sensor is in working condition. When the battery level drops to 0%, it will damage the battery. ?

　　The temperature sensor K-type thermocouple sensor measures the temperature of flue gas, and the host can measure flue gas temperatures up to 1250 ° C. The NTC thermistor sensor equipped with the measuring instrument can measure both internal temperature and ambient temperature. If the temperature control of flue gas must be carried out through the gas supply pipe (such as indoor sealed boilers), it is recommended to use TcK temperature probes (K-type thermocouples) to obtain more combustion efficiency calculation values.

　　Pressure sensor semiconductor sensor measures suction and differential pressure, with a range of -200~+200mbar. ?

　　At the bottom of the analyzer, there are two hose connection ports for flue gas input and positive and negative pressure input. One is connected to the condensate tank for connecting flue gas (black, marked as "G"), and the other is connected to the positive pressure input port (orange, marked as "P+"). The fuel type analyzer provides data support for various common fuels. If necessary, operators can also manually add fuel and related data.

　　The calibration of the factory calibration certificate analyzer is achieved by comparing it with the standards of the metrology laboratory, which regularly certifies its data to be close to the international authoritative laboratory level. Each analyzer is equipped with a factory calibration certificate, which indicates the reference value, measured value, allowable error limit, and discovered error of each measurement parameter.

　　The analyzer complies with the 2015/863 EU (RoHS 3) standard. Documents can be provided upon request. At the same time, it also meets the following execution standards: EN 50379-1 and EN 50379-2, UNI 10389, UL& cUL Certification, BS 7967:2015, BS EN 50543:2011, UNE 60670-10 and ES.02173.ES. Directive 2014/53/EU。 The declaration that complies with EU standards can be found at:

AfterSalesService :

• Combustion efficiency analyzer