American ATI hydrogen peroxide sensor
Category:
Instrumentation/Analytical instruments/Gas analyzer
Model:
ATI B12-34-7-0010-1
Brand:
ATI
brand:
ATI
model:
ATI B12-34-7-0010-1
Item Number:
one hundred and twenty-three
material:
composite material
type:
Vibration spectrum analysis
Installation method:
Portable handheld device
display mode:
Digital Display
Coverage frequency:
fifty
level accuracy:
zero point one
distortion:
one hundred and twenty-three
sensitivity:
eleven
weight:
zero point eight seven
Specifications:
handheld
Processing & Customization:
No
Whether it is imported:
No
Place of Origin:
Shandong
Retail Price
20,000.00USD
重量
kg
- Product Description
-
brand ATI
model ATI B12-34-7-0010-1
Item Number one hundred and twenty-three
material composite material
type Vibration spectrum analysis
Installation method Portable handheld device
display mode Digital Display
Coverage frequency fifty
level accuracy zero point one
distortion one hundred and twenty-three
sensitivity eleven
weight zero point eight seven
Specifications handheld
Processing & Customization No
Whether it is imported No
Place of Origin Shandong
Description :
American ATI hydrogen peroxide concentration sensor
The basic B12 moisture detection system includes a 2-wire transmitter powered by a loop and a corrosion-resistant sensing probe specifically designed for * RH. The probe can be inserted into the discharge pipe or installed in the distributor. The sample gas needs to flow through the probe.
When remote display and alarm relays are required, the B12 moisture system can provide direct gas concentration digital display and 4-20mA output of the transmitter. B12 can also be connected to DCS, PLC or other devices. In short, B12 is an excellent solution for detection problems.
Technical Indicators:
Gas type: Users can choose from the list
Selection range: Standard range is provided for each gas, otherwise it is specifically marked
Accuracy: Typically ± 5% of the measured value, limited by the accuracy of the calibration sample gas
Repeatability: ± 1% F.S
Linearity: ± 0.5% F.S
Zero drift: Depending on the sensor, usually less than 2% F.S. per month without accumulation
Range drift: Depending on the application, usually less than 3% per month
Power supply: 12-30VDC
Output: Circuit power supply 4-20mA, large load 675Q 24VDC (excluding flammable gases)
Analog circuit: optional output 4.12.20.3.6mA (fault indicator)
Shell: Polystyrene NEMA 4X optional explosion-proof type, CLASSI Div I Groups B ,C& D
Controller: Zero and range potentiometers are installed on the transmitter current plate
Temperature: -30 ℃ -+55 ℃ (oxygen -10 ℃ -+55 ℃)
Sensor operating pressure: -7-30PSIA (0.5-2Bar)
Weight: 0.251bs (0.12Kg) 1.751bs (0.8Kg) for explosion-proof type
Display: 3-digit LCD (explosion-proof type without display)
Product Model:
ATI B12-34-7-0010-1
ATI B12-34-7-2000-1
ATI B12-34-7-0010-1C
ATI B12-34-7-2000-1C
AfterSalesService :
Key words:- Hydrogen peroxide sensor
More Products
