German Fiso M600 comprehensive flue gas analyzer for high humidity and low sulfur environments

Description :

　　German Fiso M600 comprehensive flue gas analyzer

　　Product Introduction

　　Smoke analyzer suitable for industrial emissions and energy efficiency testing

　　Fast response speed, measurement

　　Equipped with a built-in fresh air valve, it can achieve long-term measurement, during which the gas sensor is automatically cleaned without the need to remove the probe from the measurement point.

　　High power vacuum pump, capable of overcoming negative pressure of 670HPa

　　Up to 6 sensors can be installed: O2, CO, H2, CO (High), SO2, NO, NO2, CO2-IR

　　The sensor has an automatic range extension to adapt to complex working conditions

　　The measured data can be exported in Excel format and curves can also be displayed

　　Automatic zero calibration upon startup, the built-in fresh air valve can work for a long time, and the sensor does not need to return to zero again during the testing process

　　Built in humidity sensor, capable of detecting the dehumidification effect of smoke, protecting the sensor and circuit board

　　Equipped with dual suction pumps, the sensor can still function normally even when the concentration in the flue gas exceeds the load state

　　Durable casing and lightweight (≈ 7kg)

　　Color display screen, Chinese operation interface, 8-line display

　　Fuel can be customized

　　Can achieve conversion between ppm and mg/m3 units

　　The instrument body has anti-collision, dustproof, and waterproof functions

　　Equipped with long-life O2 and CO sensors as standard, with a service life of ≥ 5 years

　　The SO2 sensor has strong resistance to CO interference and is capable of measuring SO2 in high humidity and low sulfur environments

　　Pitot tube, used to measure smoke flow velocity of 0.5~+70m/s

　　Custom function keys (star keys), customizable settings for one key on/off pump, one key lock, etc

　　Lithium battery has a battery life of up to 12 hours and can also be charged simultaneously during the measurement process

　　Reliable quality, made in Germany

　　The temperature of the heat tracing pipeline can be adjusted between 100 and 180 ° C, making it easy to cope with high humidity and low sulfur conditions

　　LED status lights: heating pipeline (red), cooling system (blue)

　　The filter membrane can be quickly replaced to ensure good anti fouling properties.

　　Built in Peltier gas processing module, capable of achieving gas water separation

　　Configurable tablet computer, wireless Bluetooth connection for long-distance instrument operation, distance>100 meters

　　The test data is displayed in the form of a QR code, which can be quickly transmitted by scanning with a mobile phone

　　Supports simultaneous multi-point measurement, with one tablet capable of controlling multiple smoke analyzers

　　Technical Specifications

AfterSalesService :

• flue gas analyzer