Online water quality analyzer, online COD analyzer
Category:
Instrumentation/Analytical instruments/Water quality analyzer
Model:
RC-11
Brand:
Thermal Holding Environmental Protection
model:
RC-11
Installation method:
online
Processing & Customization:
yes
measurement range:
one thousand
measurement accuracy:
3%
power supply voltage:
two hundred and twenty
resolution:
one
weight:
fifty
Place of Origin:
Qingdao
manufacturer:
Qingdao Hot Holding Environmental Protection
Retail Price
20,000.00USD
重量
kg
- Product Description
-
model RC-11
Installation method online
Processing & Customization yes
measurement range one thousand
measurement accuracy 3%
power supply voltage two hundred and twenty
resolution one
weight fifty
Place of Origin Qingdao
manufacturer Qingdao Hot Holding Environmental Protection
Description :
3、 Technical parameters of online water quality analyzer
Measurement method: According to the standard HJ828-2017 "Water Quality - Determination of Chemical Oxygen Consumption - Dichromate Method"
Measurement range: 0-200 mg/L; 0-500 mg/L ； 0-1000 mg/L ； Customizable range
Indication error: ≤± 3% Detection limit: 10mg/L
Repeatability: ≤± 3% Waste liquid volume: 6mL/time
Memory effect: ≤± 3% Actual water sample comparison: ± 8%
Constant temperature time: 900 seconds Voltage stability: ≤± 5%
Measurement cycle: 39 minutes Calibration cycle: any time
Maintenance cycle: ≥ 720h/time Maintenance workload:<2 hours/month
Reagent consumption: 3 months/500ml Display output: Equipped with a 10.1-inch color LCD touch screen
Color rendering temperature: The recommended temperature is 165 ℃, which can be set according to the actual water sample situation
Data export: Measurement values can be imported into a USB drive through a USB port and saved
Signal output: RS485/RS232/USB interface/standard 2-channel 4-20mA output/standard 2-channel switch input/output
Environmental requirements: Temperature controlled indoor environment, recommended temperature (5-28 ℃), humidity ≤ 90% (no condensation)
Power supply and output: (220V ± 22) V/AC, (50 ± 0.5Hz), 5A, 150W
Instrument size: Upper cabinet 601 * 450 * 302mm; Upper cabinet 701 * 450 * 302mm
CODcr online automatic monitoring instrument
1、 Principle of Online Water Quality Analyzer
Add a quantitative solution to the sample, and in a strongly acidic medium, use silver
As a catalyst, utilizing a unique dilution injection technique to reduce chloride ion concentration, and utilizing a combination of
Masking agent is used to mask high concentration chloride ions, which are then digested under high temperature and pressure using spectrophotometry
Measure the COD concentration value.
2、 Product features of online water quality analyzer
The new photoelectric quantitative technology is not affected by interference such as high chromaticity, suspended solids, and bubbles, with high reliability and accuracy, and strong anti-interference ability.
High detection accuracy, low measurement limit, and small long-term drift of the instrument.
It has one click self-test function and self diagnostic function.
Adopting a single channel highly integrated valve group, maintenance and cleaning are simple and fast.
24/7 networking function, monitoring instrument operation status anytime, anywhere.
It has alarm function, quality control function, and reverse control function.
It has automatic cleaning and calibration functions.
Capable of whole point measurement, interval measurement, and external control measurement.
Automatically work after power failure and recovery.
Automatic prompt and reset function for faults and missing reagents (samples).
Fault recording function.
L can save historical data for more than 3 years.
Ensure separate discharge of cleaning solution and waste liquid
AfterSalesService :
Key words:- Online water quality analyzer
More Products
