AFRISO STM225 Direct Reading Smoke and Dust Tester from Germany

Description :

　　German FisoSTMtwo hundred and twenty-fiveDirect reading smoke and dust tester

　　German FisoApplication of STM225 Direct Reading Smoke and Dust Tester:

　　The AFRISO smoke analyzer STM225 is suitable for rapid measurement of dust particle concentration in boiler combustion system flue gas, especially for solid fuel systems such as wood particle boilers, biomass boilers, coal-fired boilers, etc. STM225 can also be used in conjunction with the smoke analyzer M60 (soon to be discontinued) or the new M60X via Bluetooth to achieve synchronous measurement of smoke and dust, bringing great convenience to customers.

　　German FisoSTM225 Direct Reading Smoke and Dust Tester Features: RECHI: I866I877O23

　　5.7 "high-definition display screen, touch screen operation mode

　　Laser dual beam measurement principle, directly reading the concentration of dust particles in flue gas, fast and simple

　　The preheating time after startup is about 20 minutes, and the zero point calibration in the air is automatically performed

　　The instrument continuously measures for 15 minutes and displays the concentration of smoke and dust in real time

　　After the 15 minute measurement is completed, the 15 minute average value will be automatically calculated and displayed as the smoke concentration at the sampling point.

　　Measurement is not affected by external factors such as vibration, shock, altitude, temperature and humidity

　　● Synchronize measurement with the smoke analyzer through Bluetooth, that is, simultaneously measure the concentration of smoke and particulate matter

　　Low usage cost and easy maintenance

　　German FisoSTM225 Direct Reading Smoke and Dust Tester Product Description:

　　STM225 is a portable smoke analyzer with process configuration and Bluetooth communication function. It uses laser measurement principle and can read the concentration of dust particles in real time. Laser light sources are non-destructive, have a long lifespan, excellent stability, and precision.

　　The STM225 consists of a measurement host and a sampling system. The instrument's built-in dual beam measurement system is integrated into two separate measurement chambers for measuring the concentration of fine dust and larger particulate matter dust in flue gas. Each measurement lasts for 15 minutes and the automatically calculated average value is displayed on the screen.

　　There are multiple reasons to choose it:

　　Technology:Principles of Optical Measurement

　　Accuracy:Reliable measurement results, the measurement process is not affected by external factors such as vibration, altitude, temperature and humidity

　　Operation:Step by step guided menu measurement program, simple and intuitive, easy to operate

　　Data reading:Real time reading of measurement values through a 5.7 "high-definition display screen

　　Looking towards the future:Free software updates

　　Traceability:Can display the current measurement value

　　Save time:During the rapid preheating and zero calibration stage, real-time measurement values can be read immediately, which takes much more time than the classical weighing method

　　Connectivity:Intelligent connection of smoke analyzer M60 via Bluetooth

　　More diverse options for dust particle detection in various solid fuel systems

　　German FisoTechnical parameters of STM225 direct reading smoke and dust tester:

　　dust concentration:0~300 mg/m3

　　Smoke concentration:(passM60Or M60X)

　　O2：0~21 Vol.%

　　M60:CO(H2)：0~4,000 ppm M60X:CO(H2)：0~10,000 ppm

　　Resolution:0.1 mg/m3

　　temperature range: Operating Temperature-5~40℃ Storage temperature:-20~+50℃

　　Size（W×H×D):190×275×330 mm

　　Weight:About 7.5 kg

　　Protection level: IP 40

　　display:5.7 "color touch screen display

　　power supply voltage: AC 230 V, 50 Hz

　　communication interface: Bluetooth, USB interface

　　Measurement principle: Laser dual beam

　　Instrument package: PE material, lightweight, sturdy and durable, with shoulder straps and handles

　　German FisoSTM225 Direct Reading Smoke and Dust Tester to configure:

　　Smoke and dust host STM500, instrument backpack (for storing smoke and dust), power cord, electric heating sampling probe, 1.5m heat tracing pipeline, 400mm probe (constant heating temperature 60 ℃), air zero calibration filter, cleaning kit: cleaning cotton swab, cleaning cloth, cleaning brush, spare smoke and dust filter core 5pc/pack, product manual, factory calibration certificate and other random documents.

　　German FisoSTM225 Direct Reading Smoke and Dust Tester Selection Table:

　　German FisoSTM225 Direct Reading Smoke and Dust Tester Accessories:

　　Heating pipeline of smoke detector:Number: 570205 Smoke and dust sampling probe:Number: 57003 STM225 uses smoke sampling probe, L-shaped, 300mm,

　　Smoke detector air calibration filter:Number: 523565 Fine filter element:Number: 500208 (5-piece set)

　　Main cable of smoke detector:STM500/225 Smoke and dust instrument package: Smoke and dust instrument cleaning kit

　　Number: 570201 Number: 570210

AfterSalesService :

• Direct reading smoke and dust tester