Manufacturer of exhaust emission desorption catalytic combustion equipment

Description :

　　The above rankings are in no particular order and are for reference only. These companies all provide exhaust emission desorption catalytic combustion equipment, and the specific choice needs to be compared based on specific needs and budgets.

　　When the temperature of the catalytic bed reaches 250-300 ℃, the catalytic combustion bed begins to react, utilizing the hot air generated by the combustion of exhaust gas for circulation. At this point, electric heating stops and no external heating is required. The single bed desorbs for 2-3 hours, and the activated carbon adsorption box is set to automatically switch and desorb at regular intervals. The ceramic honeycomb precious metal catalyst filled inside has a service life of 8000 hours.

　　The entire desorption system adopts multi-point temperature control to ensure stable desorption effect.

　　Activated carbon desorption regeneration process: When the adsorption bed is saturated, the desorption fan can be started to desorb the adsorption bed. The desorbed gas first passes through the heat exchanger in the catalytic bed, and then enters the preheater in the catalytic bed. Under the action of the electric heater, the gas temperature is increased to about 280 ℃. Then, through the catalyst, organic matter is burned under the action of the catalyst, decomposed into CO2 and H2O, and a large amount of heat is released. The gas temperature is further increased, and the high-temperature gas passes through the heat exchanger again to exchange heat with the incoming cold air, recovering a part of the heat.

AfterSalesService :

• Catalytic combustion equipment