50 cubic meters of liquid oxygen, nitrogen, and argon storage tanks are welcome to visit the Low Temperature Storage Tank Business Center for customer service

Description :

　　Normally, the advantages and application advantages of low-temperature storage tank technology are double-layer fixed vacuum powder insulated storage tanks. The main reason for this is that the inner liner material is made of stainless steel, and the outer liner material is Q235B or 16MnR. The rest of its surface anti-corrosion coating adopts processes such as sandblasting rust removal, blowing, spraying, etc. At the same time, usually, two-component rapid curing liquid coating is used. So that it can be widely applied by everyone. TAG: Introduction to the important research and design processes of low-temperature storage tanks.

　　Small and medium-sized gasification stations often use pressure based low-temperature storage methods, mainly using cylindrical low-temperature vacuum powder insulated storage tanks. The same important technical parameter for the insulation performance of low-temperature storage tanks is the static evaporation rate. The static evaporation rate of the storage tank and the vacuum degree of the storage tank interlayer should be regularly tested, and the static evaporation rate can be measured by the emission of BOG. If abnormal situations such as occasional strengthening or reduction are observed, they should be dealt with immediately. The hydraulic control inside the storage tank is quite important and must be controlled within an agreed range. There is a danger if it is too high or too low. Maintain pressure balance inside and outside the tank, and the pressure inside the tank cannot be too high or too low. Preventing the occurrence of rolling phenomenon, rolling can lead to overpressure and instability of the storage tank.

AfterSalesService :

• Oxygen
• nitrogen
• and argon storage tanks