Xi'an 30 cubic meter liquid argon storage tank manufacturing standard liquid argon storage tank supplier

Description :

　　1. The operator should be familiar withTank processandInstruction ManualThe pressure gauge valve and safety shut-off valve must be normally open.

　　2. JB6898 should be followed during operation《Safety rules for the use of low-temperature liquid storage and transportation equipmentThe prescribed safety requirements and measures.

　　3. Fill thoroughly for initial and normal filling, and turn on the liquid level gauge before filling;During the initial filling, the liquid storage tank is purged, replaced, and cooled with corresponding high-purity gas to achieve the required purity.

　　4. The liquid tanker is about 3 meters away from the storage tank. After all preparation work meets the regulations, connect the tanker infusion hose to the inlet of the storage tank. When the tanker is openedDischarge valve and tank blow off valveWhen liquid is sprayed out, open the inlet valve of the storage tank, close the blow off valve, and fill the liquid into the storage tank.

　　5. Open during the filling processbleeder valveandMonitoring valvePay close attention to the liquid level gauge and monitoring valve to prevent overloading (filling coefficient of 0.95).

　　6. When the monitoring valve sprays liquid, immediately stop filling and close the tankerDischarge valve and storage tank inlet valve.

　　7. After draining the residual liquid and gas from the infusion tube, remove the infusion hose.

　　8. CloseMonitoring valve and vent valve.

AfterSalesService :

• Xi'an 30 cubic meter liquid argon storage tank