Vertical 10 cubic liquid nitrogen storage tank manufacturer Low temperature storage tank manufacturing base

Description :

Liquid nitrogen storage tankThe core content of the product is the assembly welding of the cylinder body. In terms of assembly, the process department, production department, and equipment department have proposed multiple solutions, and later self-made an assembly operation rack, which is very practical and convenient.

　　The total length of the liquid nitrogen storage tank cylinder mounting bracket is 9M, which is rotated by bidirectional rollers and driven by a cycloidal needle type gear rack transmission. The composition structure is controlled by a frequency converter. A self-made U-shaped bracket is used as an auxiliary tool for lifting the cylinder, which is simple, convenient, and safe.

　　One section of the liquid nitrogen storage tank is placed on one side of the roller of the docking frame, and the other section is placed closely behind the previous section. After adjusting the position, welding begins. The welding personnel stand on the side without moving and directly carry out the welding work of the liquid nitrogen storage tank. After completing the welding on one side, they only need to rotate the docking frame, adjust the welding position, and weld the remaining welds.

　　Originally, the installation of the liquid nitrogen storage tank cylinder was done vertically in the installation pit, which was cumbersome and unsafe to operate. It took half a day to install the three sections of the cylinder. Since the development of a self-made docking rack, the operation is relatively simple and safe. It only takes 2 hours to assemble the three section cylinder, greatly improving production efficiency.

AfterSalesService :

• Liquid nitrogen storage tank