Shandong liquid nitrogen storage tank manufacturer sells double-layer stainless steel storage tank specifications for liquid nitrogen storage tanks
Category:
mechanical equipment/Storage and transportation equipment/storage tank
Model:
CFL10-0.8
Brand:
Zhongjie Special Equipment
Retail Price
125,000.00USD
重量
kg
- Product Description
-
Description :
When the liquid nitrogen tank is not in use, it should be cleaned thoroughly with cold water, drained, dried with a hair dryer, and stored at room temperature for future use. After the liquid nitrogen in the liquid nitrogen tank evaporates, the remaining ignored chemical substances (such as refrigerated semen) quickly dissolve and become liquid chemical substances attached to the inner liner, which will corrode the inner liner of the aluminum alloy profile. If cracks occur, the liquid nitrogen tank will be damaged. Therefore, it is necessary to clean the pottery tank after the liquid nitrogen in the liquid nitrogen tank is consumed. The actual cleaning method is as follows: first remove the lifting cylinder from the liquid nitrogen tank, remove the liquid nitrogen, and let it sit for 213 days until the temperature inside the tank rises to around 0 ℃. Then pour warm water at around 30 ℃ and clean it with a cloth. If you notice any dissolved chemicals sticking to the bottom of the inner container, be sure to carefully scrub it thoroughly. Then rinse the numbers with cold water
1) Liquid nitrogen is a warm liquid (-196 ℃) that can cause burns when splashed onto the skin, so special attention should be paid when filling and removing liquid nitrogen.
(2) Do not use other plugs instead of specialized tank caps, let alone sealed plugs, to prevent damage to the container caused by the increase in nitrogen pressure formed during continuous evaporation of liquid nitrogen.
(3) Users should be familiar with the weight and capacity of each tank, measure regularly (every 10 days), keep records of liquid nitrogen consumption, and add liquid nitrogen in a timely manner.
When checking the liquid level in the container, insert a solid plastic or wooden stick into the bottom and remove it after 5-10 seconds. The length of frost is the liquid level height. Do not use a hollow tube to check the liquid level to prevent liquid nitrogen from spraying out of the tube and injuring people.
AfterSalesService :
Key words:- Liquid nitrogen storage tank manufacturer
More Products
