Cleaning method for heat transfer oil furnace - Price advantage of 2-ton heat transfer oil boiler

Description :

　　1. Water based cleaning method: It involves usingThermal oil furnaceAfter draining the waste oil from the system, it should be blown clean with compressed air and then pre washed with water. The purpose is to pre wash all the waste oil in the heat transfer oil furnace system to the low-level oil tank for oil-water separation. After the pre washing is completed, add cleaning agent to fill the entire system, and start the circulation pump for heating circulation.

　　Through the use of specialized chemical solution for heating and circulation, carbon deposits undergo chemical reactions such as infiltration, dissolution, and stripping in the cleaning solution. All waste oil carbon deposits in the thermal oil furnace system are decomposed into the cleaning solution. After passing the inspection and cleaning standards, the waste oil and residual carbon from the decomposition of the chemical solution in the heat transfer oil furnace system are all flushed out of the system through the method of adding clean water and removing dirty water. After cleaning, it is equivalent to a new set of equipment. This cleaning method is highly technical and requires high quality cleaning agents. A solid water-based cleaning agent ensures thorough technical cleaning.

　　2. Full solvent cleaning method: Drain all the waste oil in the heat transfer oil furnace system, and then blow it out with compressed air. However, even if it is blown clean, 30-40% of the waste oil will still remain and cannot be blown out. Fill the system with solvent until it can circulate.

　　Start the circulation pump to circulate for a certain period of time, and then release the solvent mixed waste liquid. If it cannot be released, use compressed air to blow the waste oil mixture of the heat transfer oil furnace system. There will still be residual mixture of 30-40 or more. This cleaning is simple and easy. If the new heat transfer oil is cycled, it will immediately turn black, deteriorate, have residual carbon, acid value, low waste, etc., which will be more than 10 times higher than that of high-tech heat transfer oil.

　　3. Online cleaning method: Calculate based on the total amount of heat transfer oil in the entire heat transfer oil furnace system, add 5-10% solvent cleaning agent, first release an equal amount of waste heat transfer oil, then add an equal amount of online cleaning agent, start the circulation pump to circulate for a period of time, or 1-2 days before releasing, and then blow out the waste oil and solvent cleaning agent in the heat transfer oil furnace system. This completes the cleaning. This cleaning is very simple and the cost is also very low. This cleaning effect is very poor. Especially when replacing the heat transfer oil, the damage is very serious, and a large amount of waste liquid will remain. Adding new heat transfer oil and circulating it will become scrap oil.

AfterSalesService :

• thermal oil boiler