Industrial gas station 30 cubic liquid oxygen storage tank manufacturer, design, installation, customization unit

Description :

　　The installation site of the liquid oxygen storage tank should have good ventilation, and the outdoor fence should not be damaged. There should be no open flames, flammable and explosive materials, or low-lying areas within 5 meters;

　　2. Storage tanks must have grounding devices and lightning protection devices to eliminate static electricity. The anti-static grounding resistance shall not exceed 10 Ω; The lightning protection device has an impact resistance of 30 Ω and is tested twice a year;

　　3. The filling rate of the storage tank shall not exceed 95%, and excessive filling is strictly prohibited;

　　4. The pressure gauge is strictly prohibited from using oil and should be regularly calibrated; The safety valve must be made of stainless steel or copper, regularly calibrated, and strictly degreased;

　　When valves, instruments, pipelines, etc. on the equipment freeze, nitrogen, air, or hot water at 70-80 ℃ should be used for thawing, and open flame heating is strictly prohibited;

　　When there is liquid in the storage tank, hot work repair is prohibited and must be heated to room temperature before repair;

　　7. Operators must undergo training and pass the examination before they can take up their posts. Do not wear synthetic clothing with oil stains or electrostatic effects, and do not wear shoes with nails. The valve should be opened and closed slowly during operation. When not in use, the pressure boosting valve should be tightly closed;

　　When liquid oxygen is stored in a closed container, someone must monitor the pressure and not overpressure;

　　9. Liquid oxygen is not allowed to splash onto unprotected skin to prevent serious incidents;

AfterSalesService :

• 30 cubic meter liquid oxygen storage tank manufacturer