Selection of Low Temperature Liquefied Natural Gas Storage Tanks and CFW60-0.8 Tank Prices

Description :

　　We choose to purchaseLow temperature liquefied natural gas storage tankThere are many things to pay attention to when choosing a storage tank, and only by considering multiple aspects comprehensively can one choose the tank that is more suitable for oneself.

　　What factors should be considered when selecting low-temperature liquefied natural gas storage tanks

　　Firstly, it is necessary to understand whether the solution material contained is resistant to polyethylene. Although polyethylene does not have any substance that can dissolve it, there are still a small amount of substances that can swell it after long-term storage, such as benzene, toluene, halogenated hydrocarbons, primary lipids, etc., which are not suitable for use.

　　Secondly, when selecting low-temperature liquefied natural gas storage tanks, attention should be paid to working pressure, temperature, and liquid specific gravity. In general, its working environment is at room temperature and pressure, with a specific gravity below 1.2. In special cases, the temperature can be below 60 ℃, and the small volume can withstand 1-2kg/cm2 hydraulic pressure. The specific gravity of vertical storage tanks does not exceed 1.3, and that of horizontal storage tanks does not exceed 1.5.

　　In the operation of low-temperature liquefied natural gas storage tanks, when the inlet and outlet flow rates are large, corresponding exhaust holes should be installed. When changing the contained liquid, it is necessary to understand whether the low-temperature liquefied natural gas storage tank is suitable for the contained liquid; If there are joints or flange connections in the lower part of a low-temperature liquefied natural gas storage tank, the pipes should be perpendicular to the barrel wall and soft connections should be used to avoid uneven expansion of the barrel wall after being filled with liquid, which may damage the joint connection and cause leakage, and in severe cases, damage the joint and barrel body.

　　When the inlet is higher from the bottom of the tank, it should be bent towards the wall of the low-temperature liquefied natural gas storage tank to allow the incoming liquid to fall down along the wall and reduce the impact on the bottom. The storage pressure of low-temperature liquefied natural gas storage tanks is relatively high, and attention should be paid to strengthening when connecting with other flanges.

　　General flanges and low-temperature liquefied natural gas storage tanks are usually tightened when leaving the factory, which may cause looseness during transportation, loading and unloading. Users should check the sealing performance of the rotational plastic storage tank before use and add liquid to investigate whether there is leakage. The rotational molding storage tank containing chemical liquids should be leak tested with water to prevent losses.

　　Generally, when choosing to purchase a low-temperature liquefied natural gas storage tank, we should comprehensively consider the above factors, and then we can purchase a suitable low-temperature liquefied natural gas storage tank for ourselves.

AfterSalesService :

• Selection of Low Temperature Liquefied Natural Gas Storage Tanks