Installation and construction of LNG refueling stations, price of low-temperature 30 cubic storage tanks in Shandong

Description :

LNG refueling stationDuring the installation and construction process, various common problems are always encountered. Firstly, we will introduce the composition and main functional modes of LNG refueling station installation and construction.

　　LNG refueling station: It is a refueling station that fills LNG liquid for LNG vehicles. Main equipment components: LNG storage tank, fully functional pump lever, LNG refueling machine. LNG storage tanks can be temporarily replaced by tanker trucks. The main functional modes of LNG refueling stations are as follows:

　　Gas filling function: The LNG in the storage tank is pumped out and pressurized by the LNG low-temperature pump, and then added to the car through the liquid dispenser.

　　Unloading function: The low-temperature pump pumps LNG from the LNG tanker to the LNG storage tank.

　　Boosting function: Inject some LNG from the storage tank into the gasifier to vaporize it into BOG and enter the storage tank. Stop when the tank pressure reaches the set pressure.

　　Temperature control function: Use an LNG low-temperature pump to extract some LNG from the storage tank and inject it into the heater before entering the storage tank. Stop when the liquid temperature reaches the set temperature.

　　A typical pure LNG refueling station consists of LNG storage tanks, pump levers and submersible pumps, tank pressurized gasifiers, unloading gasifiers, EAG heaters (these three gasifiers may vary depending on the process flow), and liquid dispensers.

　　The above components related to the installation and construction of LNG refueling stations are essential and inseparable for the construction of related LNG refueling stations.

AfterSalesService :

• Installation and construction of LNG refueling stations